Residence Time and Concentration Distribution in a Kenics Static Mixer

被引:7
作者
Mohammadi, Akbar [1 ]
Moghaddas, Jafarsadegh [1 ]
Ariamanesh, Arman [1 ]
机构
[1] Sahand Univ Technol, Fac Chem Engn, Transport Phenomena Res Ctr, Tabriz, Iran
关键词
Concentration; Dispersion model; RTD; Static mixer; FLOW; SYSTEM;
D O I
10.1080/00986445.2013.832225
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Static mixers, often referred to as motionless mixers, are in-line mixing devices that consist of mixing elements inserted into a length of pipe. Most of the experimental works in this field have concentrated on establishing design guidelines and pressure drop correlations. Due to experimental difficulties, few articles have been published on the investigation of the flow and mixing mechanisms. In this work, a Kenics KMX static mixer was utilized to study concentration and residence time distribution (RTD) and effect of Reynolds number on mixing. The static mixer had six mixing elements arranged in-line along the length of the tube, and the angle between two neighboring elements was 90 degrees. The length of the mixer was 0.98 m with internal and external diameters of 5.0 cm and 6.0 cm, respectively. The main continuous fluid was water, and NaCl solution was used as a tracer. All experiments were conducted with three replications at three Reynolds numbers, Re = 1188.71, 1584.95, and 1981.19. A dispersion model was used to model the RTD data. The experimental results were compared with the model results and reasonable agreement was achieved.
引用
收藏
页码:144 / 150
页数:7
相关论文
共 50 条
  • [21] Development of positron emission particle tracking for studying laminar mixing in Kenics static mixer
    Rafiee, Marjan
    Simmons, Mark J. H.
    Ingram, Andy
    Stitt, E. Hugh
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 2013, 91 (11) : 2106 - 2113
  • [22] Kenics static mixer as turbulence promoter in cross-flow microfiltration of skim milk
    Krstic, DM
    Tekic, MN
    Caric, MD
    Milanovic, SD
    SEPARATION SCIENCE AND TECHNOLOGY, 2003, 38 (07) : 1549 - 1560
  • [23] Effect of residence time and energy dissipation on drop size distribution for the dispersion of oil in water using KMS and SMX plus static mixer
    Forte, G.
    Brunazzi, E.
    Alberini, F.
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 2019, 148 : 417 - 428
  • [24] Study of laminar mixing in kenics static mixer by using Positron Emission Particle Tracking (PEPT)
    Rafiee, Marjan
    Bakalisa, Serafim
    Fryer, Peter J.
    Ingram, Andy
    11TH INTERNATIONAL CONGRESS ON ENGINEERING AND FOOD (ICEF11), 2011, 1 : 678 - 684
  • [25] Size adjustment of spherical temperature-sensitive hydrogel beads by liquid-liquid dispersion using a Kenics static mixer
    Tajima, Hideo
    Yoshida, Yuta
    Abiko, Satoko
    Yamagiwa, Kazuaki
    CHEMICAL ENGINEERING JOURNAL, 2010, 156 (02) : 479 - 486
  • [26] The effect of symmetrical perforated holes on the turbulent heat transfer in the static mixer with modified Kenics segments
    Meng, Huibo
    Zhu, Guangxue
    Yu, Yanfang
    Wang, Zongyong
    Wu, Jianhua
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 99 : 647 - 659
  • [27] Kenics Static Mixer Combined with Gas Sparging for the Improvement of Cross-Flow Microfiltration: Modeling and Optimization
    Jokic, Aleksandar
    Lukic, Natasa
    Pajcin, Ivana
    Vlajkov, Vanja
    Dmitrovic, Selena
    Grahovac, Jovana
    MEMBRANES, 2022, 12 (07)
  • [28] Intrinsic Mode Entropy Analysis of Tube-Wall Pressure Fluctuation Signals in the Kenics Static Mixer
    Meng, Hui-Bo
    Liu, Zhi-Qiang
    Yu, Yan-Fang
    Xiong, Qiang
    Wu, Jian-Hua
    INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2011, 9
  • [29] A Flexible Kenics Mixer for Applications in Liquid Chromatography
    Dsk, Prachet
    Fodor, Petru S.
    Kothapalli, Chandrasekhar R.
    MICROMACHINES, 2023, 14 (07)
  • [30] Experimental and numerical investigation on optimization of foaming performance of the kenics static mixer in compressed air foam system
    Li, Huan
    Yu, Xiaoyang
    Song, Yuqing
    Li, Qian
    Lu, Shouxiang
    ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS, 2023, 17 (01)