Residence Time and Concentration Distribution in a Kenics Static Mixer

被引:7
|
作者
Mohammadi, Akbar [1 ]
Moghaddas, Jafarsadegh [1 ]
Ariamanesh, Arman [1 ]
机构
[1] Sahand Univ Technol, Fac Chem Engn, Transport Phenomena Res Ctr, Tabriz, Iran
关键词
Concentration; Dispersion model; RTD; Static mixer; FLOW; SYSTEM;
D O I
10.1080/00986445.2013.832225
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Static mixers, often referred to as motionless mixers, are in-line mixing devices that consist of mixing elements inserted into a length of pipe. Most of the experimental works in this field have concentrated on establishing design guidelines and pressure drop correlations. Due to experimental difficulties, few articles have been published on the investigation of the flow and mixing mechanisms. In this work, a Kenics KMX static mixer was utilized to study concentration and residence time distribution (RTD) and effect of Reynolds number on mixing. The static mixer had six mixing elements arranged in-line along the length of the tube, and the angle between two neighboring elements was 90 degrees. The length of the mixer was 0.98 m with internal and external diameters of 5.0 cm and 6.0 cm, respectively. The main continuous fluid was water, and NaCl solution was used as a tracer. All experiments were conducted with three replications at three Reynolds numbers, Re = 1188.71, 1584.95, and 1981.19. A dispersion model was used to model the RTD data. The experimental results were compared with the model results and reasonable agreement was achieved.
引用
收藏
页码:144 / 150
页数:7
相关论文
共 50 条
  • [1] Residence time distribution and liquid holdup in Kenics® KMX static mixer with hydrogenated nitrile butadiene rubber solution and hydrogen gas system
    Madhuranthakam, Chandra Mouli R.
    Pan, Qinmin
    Rempel, Garry L.
    CHEMICAL ENGINEERING SCIENCE, 2009, 64 (14) : 3320 - 3328
  • [2] Numerical study of the mixing characterization in the Kenics static mixer
    Wu, Jianhua
    Guo, Chengcheng
    Gong, Bin
    Bao, Zhongping
    PROCEEDINGS OF THE SECOND INTERNATIONAL CONFERENCE ON MODELLING AND SIMULATION (ICMS2009), VOL 3, 2009, : 232 - 237
  • [3] Numerical Research of Pressure Drop in Kenics Static Mixer
    Chen, Guanghui
    Liu, Zhengliang
    MANUFACTURING PROCESS AND EQUIPMENT, PTS 1-4, 2013, 694-697 : 547 - 550
  • [4] Prediction of turbulent instantaneous velocity time series in the Kenics static mixer
    Meng Hui-bo
    Liu Zhi-qiang
    Gao Yan-li
    Yu Yan-fang
    Wu Jian-hua
    ICMS2010: PROCEEDINGS OF THE THIRD INTERNATIONAL CONFERENCE ON MODELLING AND SIMULATION, VOL 2: MODELLING AND SIMULATION IN ENGINEERING, 2010, : 66 - 69
  • [5] Design and characterization of Kenics static mixer crystallizers
    Thomas, Kiran Mathew
    Nyande, Baggie W.
    Lakerveld, Richard
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 2022, 179 : 549 - 563
  • [6] LARGE EDDY SIMULATION OF TURBULENT FLOW AND HEAT TRANSFER IN A KENICS STATIC MIXER
    Murasiewicz, Halina
    Zakrzewska, Barbara
    CHEMICAL AND PROCESS ENGINEERING-INZYNIERIA CHEMICZNA I PROCESOWA, 2019, 40 (01): : 87 - 99
  • [7] Macroscopic estimation method of the mixedness of Kenics type static mixer
    You, Sunho
    Higuchi, Naotaka
    Ueda, Toshihisa
    KOREAN JOURNAL OF CHEMICAL ENGINEERING, 2009, 26 (06) : 1497 - 1503
  • [8] EFFECT OF ELEMENTS CONNECTION TYPES ON MIXING PERFORMANCE OF KENICS STATIC MIXER
    Li, Zhijun
    Wang, Jiankang
    Zheng, Yiwen
    Wang, Chenyang
    MECHANIKA, 2024, 30 (05): : 466 - 471
  • [9] Analysis of the Calcium Alginate Gelation Process Using a Kenics Static Mixer
    Hozumi, Takuro
    Ohta, Seiichi
    Ito, Taichi
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2015, 54 (07) : 2099 - 2107
  • [10] Effect of Geometry Design on Mixing Performance of Newtonian Fluids using Helical Overlapped Mixer Elements in Kenics Static Mixer
    Talhaoui, A.
    Draoui, B.
    Youcefi, A.
    JOURNAL OF APPLIED FLUID MECHANICS, 2021, 14 (06) : 1643 - 1656