The effect of fibres in the rheology of self-compacting concrete

被引：26

作者：

Alberti, M. G. ^{[1
]}

Enfedaque, A. ^{[1
]}

Galvez, J. C. ^{[1
]}

机构：

[1] Univ Politecn Madrid, Dept Ingn Civil ETS Ingenieros Caminos Canales &, C Prof Aranguren S-N, E-28040 Madrid, Spain

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2019年 / 219卷

关键词：

Self-compacting concrete; Fresh-state tests; Rheology; Polyolefin fibres; Steel fibres; REINFORCED CONCRETE; MECHANICAL-PROPERTIES; WORKABILITY; BEHAVIOR; PERFORMANCE; PARAMETERS; EXTENSION; FLOW; FRC;

D O I：

10.1016/j.conbuildmat.2019.05.173

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The successful use of self-compacting concrete (SCC) in the construction industry is based on the simplification of pouring procedures, as it fills the formwork merely by the action of its own weight. However, the presence of fibres might undermine the fresh-state properties and, hence, minimise the advantages obtained from use of SCC. From the point of view of fibre reinforced concrete (FRC), the flow of SCC enhances the positioning of the fibres and therefore the residual tensile strength of the composite material. Consequently, study of the rheology of SCC-FRC permits the characterisation and classification of the mix and provides a remarkable tool for design. That is to say, it is essential in analysing fresh state not only by conventional slump flow tests but also by associating such results with those obtained by a rheometer. The significance of this research lies in the comparison of the fresh-state results obtained through slump flow and V-funnel tests with those from a BT-Rheometer, using two types of SCC and both steel and polyolefin fibres. The results show the remarkable influence of the type of fibres and limitations of measurement in terms of physical parameters. This provides relevant information for future applications of the fresh state of FRC-SCC whether using steel or polyolefin fibres. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：144 / 153

页数：10

共 58 条

[1]

ACI, 2007, 237R07 ACI

[2] Pull-out behaviour and interface critical parameters of polyolefin fibres embedded in mortar and self-compacting concrete matrixes [J].

Alberti, M. G. ;

Enfedaque, A. ;

Galvez, J. C. ;

Ferreras, A. .

CONSTRUCTION AND BUILDING MATERIALS, 2016, 112 :607-622

[3] Reliability of polyolefin fibre reinforced concrete beyond laboratory sizes and construction procedures [J].

Alberti, M. G. ;

Enfedaque, A. ;

Galvez, J. C. ;

Agrawal, V. .

COMPOSITE STRUCTURES, 2016, 140 :506-524

[4] Fracture mechanics of polyolefin fibre reinforced concrete: Study of the influence of the concrete properties, casting procedures, the fibre length and specimen size [J].

Alberti, M. G. ;

Enfedaque, A. ;

Galvez, J. C. .

ENGINEERING FRACTURE MECHANICS, 2016, 154 :225-244

[5] Comparison between polyolefin fibre reinforced vibrated conventional concrete and self-compacting concrete [J].

Alberti, M. G. ;

Enfedaque, A. ;

Galvez, J. C. .

CONSTRUCTION AND BUILDING MATERIALS, 2015, 85 :182-194

[6] Polyolefin fiber-reinforced concrete enhanced with steel-hooked fibers in low proportions [J].

Alberti, M. G. ;

Enfedaque, A. ;

Galvez, J. C. ;

Canovas, M. F. ;

Osorio, I. R. .

MATERIALS & DESIGN, 2014, 60 :57-65

[7] On the mechanical properties and fracture behavior of polyolefin fiber-reinforced self-compacting concrete [J].

Alberti, M. G. ;

Enfedaque, A. ;

Galvez, J. C. .

CONSTRUCTION AND BUILDING MATERIALS, 2014, 55 :274-288

[8]

[Anonymous], FIB MOD COD MOD COD

[9]

[Anonymous], 6 E AS PAC C STRUCT

[10]

[Anonymous], PRO 33 3 INT RILEM S

← 1 2 3 4 5 6 →