The effect of mechanical alloying on microstructure and mechanical properties of MoSi2 prepared by spark plasma sintering

被引:26
作者
Kermani, Milad [1 ]
Razavi, Mansour [1 ]
Rahimipour, Mohammad Reza [1 ]
Zakeri, Mohammad [1 ]
机构
[1] Mat & Energy Res Ctr, Tehran, Iran
关键词
MoSi2; Spark plasma sintering; Mechanical alloying; Microstructure; CHEMICAL-VAPOR; TEMPERATURE; NANOCOMPOSITE; POWDER;
D O I
10.1016/j.jallcom.2014.01.041
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In this research the effect of mechanical alloying on the in situ synthesis-sintering behavior and mechanical properties of MoSi2 has been investigated. The Mo and Si powders according to MoSi2 stoichiometric composition were mechanically alloyed at different times. Then, the powders were subjected to spark plasma sintering process for preparing monolithic MoSi2. X-ray diffraction pattern of the sintered samples showed that by increasing the mechanical alloying time, Mo5Si3 has been formed. It seems that the formation of Mo5Si3 is due to the effect of mechanical alloying on microstructure and thermodynamic condition of the reaction. Crown Copyright (C) 2014 Published by Elsevier B.V. All rights reserved.
引用
收藏
页码:242 / 249
页数:8
相关论文
共 34 条
  • [1] Synthesis and structural characterization of nanocrystalline (Ni, Fe)3Al intermetallic compound prepared by mechanical alloying
    Adabavazeh, Z.
    Karimzadeh, F.
    Enayati, M. H.
    [J]. ADVANCED POWDER TECHNOLOGY, 2012, 23 (03) : 284 - 289
  • [2] A CRITICAL-EVALUATION OF INDENTATION TECHNIQUES FOR MEASURING FRACTURE-TOUGHNESS .1. DIRECT CRACK MEASUREMENTS
    ANSTIS, GR
    CHANTIKUL, P
    LAWN, BR
    MARSHALL, DB
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1981, 64 (09) : 533 - 538
  • [3] Ceramic components manufacturing by selective laser sintering
    Bertrand, Ph.
    Bayle, F.
    Combe, C.
    Goeuriot, P.
    Smurov, I.
    [J]. APPLIED SURFACE SCIENCE, 2007, 254 (04) : 989 - 992
  • [4] Hot isostatic pressing (HIP) of α-Al2O3 submicron ceramics pressureless sintered at different temperatures: Improvement in mechanical properties for use in total hip arthroplasty (THA)
    Bocanegra-Bernal, M. H.
    Dominguez-Rios, C.
    Garcia-Reyes, A.
    Aguilar-Elguezabal, A.
    Echeberria, J.
    Nevarez-Rascon, A.
    [J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (05) : 900 - 906
  • [5] Synthesis and characterization of nanocrystalline α-Al2O3 using Al and Fe2O3 (hematite) through mechanical alloying
    Bodaghi, Masoud
    Zolfonoon, Hesam
    Tahriri, Mohammadreza
    Karimi, Meysam
    [J]. SOLID STATE SCIENCES, 2009, 11 (02) : 496 - 500
  • [6] ULTRA-RAPID HEATING BY EXOTHERMIC HEAT OF MIXING IN METAL-METAL MULTILAYER COMPOSITES
    BORDEAUX, F
    YAVARI, AR
    DESRE, P
    [J]. REVUE DE PHYSIQUE APPLIQUEE, 1987, 22 (08): : 707 - 711
  • [7] In situ synchrotron investigation of MOSi2 formation mechanisms during current-activated SHS sintering
    Cabouro, G.
    Chevalier, S.
    Gaffet, E.
    Vrel, D.
    Boudet, N.
    Bernard, F.
    [J]. ACTA MATERIALIA, 2007, 55 (18) : 6051 - 6063
  • [8] Cetinkaya S., 2001, INT J REF METAL HARD, V29, P566
  • [9] DIFFUSIONAL REACTIONS IN THE COMBUSTION SYNTHESIS OF MOSI2
    DEEVI, SC
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1992, 149 (02): : 241 - 251
  • [10] Microwave-assisted sintering of zircon
    Ebadzadeh, T.
    Valefi, M.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 448 (1-2) : 246 - 249