Effect of diffusion of Ni and B on the microstructure and hardness of Ti Cp

被引:9
|
作者
Rampin, I. [1 ]
Brunelli, K. [1 ]
Dabala, M. [1 ]
Magrini, M. [1 ]
机构
[1] Univ Padua, DPCI, I-35131 Padua, Italy
关键词
Titanium Cp; Diffusion; Widmanstatten structure; Heat treatment; Hardness; beta-Transus temperature; MECHANICAL-PROPERTIES; TITANIUM-ALLOYS; TI-6AL-4V ALLOY; BORON;
D O I
10.1016/j.jallcom.2009.03.080
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The present work has the aim to study the effect of the diffusion of Ni and Ni-B on the microstructure and the hardness of Ti Cp. Ni and NiB were deposited on the titanium by electrolytic and electroless deposition, respectively. The treatments of diffusion were carried out at temperatures below and above the titanium beta-transus temperature in order to examine the effect of the two different phases on diffusion behaviour and the final microstructure. The samples, after holding at the temperature of diffusion for 1 h, were cooled in furnace at 5 degrees C/min. The resulting microstructure was investigated by optical microscope (OM), SEM-EDS, glow discharge optical spectrometer (GDOS), XRD and micro-hardness test. Better results were obtained at temperature above the beta-transus, which can be attributed to the increase of diffusion due, both, to the high temperature and the cubic body-centred structure that Ti assumes above the beta-transus. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码:246 / 253
页数:8
相关论文
共 50 条
  • [31] The effect of a small addition of boron on the sintering densification, microstructure and mechanical properties of powder metallurgy Ti-7Ni alloy
    Luo, S. D.
    Yang, Y. F.
    Schaffer, G. B.
    Qian, M.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 555 : 339 - 346
  • [32] Effect of bonding pressure on microstructure and mechanical properties of Ti-6Al-4V diffusion-bonded joint
    Samavatian, M.
    Zakipour, S.
    Paidar, M.
    WELDING IN THE WORLD, 2017, 61 (01) : 69 - 74
  • [33] Effect of Cr content on microstructure and properties of Ni-Ti-xCr coatings by laser cladding
    Han, Tengfei
    Xiao, Meng
    Zhang, Ying
    Shen, Yifu
    OPTIK, 2019, 179 : 1042 - 1048
  • [34] Effect of aging on the microstructure, hardness and chemical composition of dentin
    Montoya, C.
    Arango-Santander, S.
    Pelaez-Vargas, A.
    Arola, D.
    Ossa, E. A.
    ARCHIVES OF ORAL BIOLOGY, 2015, 60 (12) : 1811 - 1820
  • [35] Effects of Solution and Aging Treatment on Microstructure and Hardness of Ti2041 Alloy
    Zhou Xuan
    Wang Kelu
    Lu Shiqiang
    Li Xin
    RARE METAL MATERIALS AND ENGINEERING, 2021, 50 (06) : 2155 - 2162
  • [36] Effect of surfactants on the surface roughness, hardness and microstructure of electroless (Ni-P) coatings
    Elansezhian, R.
    Ramamoorthy, B.
    Nair, P. Kesavan
    INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2008, 2 (3-4) : 179 - 189
  • [37] Investigation of the effect of SiC content on the microstructure, physical properties and hardness of SiC/Ni composites
    Makled, Hanan M.
    Chowdhury, Mahmudun N.
    Ali, Ahmed, I
    Qassem, Ibrahim S.
    Daoush, Walid M.
    FUNCTIONAL MATERIALS, 2019, 26 (01): : 92 - 99
  • [38] Effect of Power on Microstructure and Hardness of Laser Cladding Ni-based WC Coating
    Wang Kaiming
    Lei Yongping
    Fu Hanguang
    Yang Yongwei
    Wei Shizhong
    Li Qingtang
    Su Zhenqing
    RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (11) : 3474 - 3478
  • [39] Effect of Growth Rate on Microstructure Evolution and Hardness in Directionally Solidified Ti-50Al-6Nb Alloy
    Liu Guohuai
    Zhang Yuan
    Li Xinzhong
    Chen Ruirun
    Su Yanqing
    Guo Jingjie
    Fu Hengzhi
    RARE METAL MATERIALS AND ENGINEERING, 2015, 44 (07) : 1655 - 1660
  • [40] TiAl diffusion bonding using Ni/Ti multilayers
    Simoes, Sonia
    Sofia Ramos, A.
    Viana, Filomena
    Teresa Vieira, M.
    Vieira, Manuel F.
    WELDING IN THE WORLD, 2017, 61 (06) : 1267 - 1273