Effect of diffusion of Ni and B on the microstructure and hardness of Ti Cp

被引:9
|
作者
Rampin, I. [1 ]
Brunelli, K. [1 ]
Dabala, M. [1 ]
Magrini, M. [1 ]
机构
[1] Univ Padua, DPCI, I-35131 Padua, Italy
关键词
Titanium Cp; Diffusion; Widmanstatten structure; Heat treatment; Hardness; beta-Transus temperature; MECHANICAL-PROPERTIES; TITANIUM-ALLOYS; TI-6AL-4V ALLOY; BORON;
D O I
10.1016/j.jallcom.2009.03.080
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The present work has the aim to study the effect of the diffusion of Ni and Ni-B on the microstructure and the hardness of Ti Cp. Ni and NiB were deposited on the titanium by electrolytic and electroless deposition, respectively. The treatments of diffusion were carried out at temperatures below and above the titanium beta-transus temperature in order to examine the effect of the two different phases on diffusion behaviour and the final microstructure. The samples, after holding at the temperature of diffusion for 1 h, were cooled in furnace at 5 degrees C/min. The resulting microstructure was investigated by optical microscope (OM), SEM-EDS, glow discharge optical spectrometer (GDOS), XRD and micro-hardness test. Better results were obtained at temperature above the beta-transus, which can be attributed to the increase of diffusion due, both, to the high temperature and the cubic body-centred structure that Ti assumes above the beta-transus. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码:246 / 253
页数:8
相关论文
共 50 条
  • [21] Microstructure and hardness of Ni-xSi alloys
    Li Liu
    Xiao-li Ma
    Su Zhao
    Journal of Shanghai Jiaotong University (Science), 2012, 17 (6) : 648 - 652
  • [22] Effect of annealing temperature on microstructure and hardness of Ni-Co alloy coating
    Man, Tinghui
    Hu, Chundong
    Lu, Hengchang
    Chen, Yuewei
    Lin, Yuan
    Dong, Han
    MATERIALS TODAY COMMUNICATIONS, 2022, 31
  • [23] Microstructure and Hardness of Ni-rrSi Alloys
    刘礼
    马晓丽
    赵素
    JournalofShanghaiJiaotongUniversity(Science), 2012, 17 (06) : 648 - 652
  • [24] Hardness and microstructure of Ti-15Mo-5Zr-3Al alloy for dental casting
    Kochi, Mamiko
    Koizumi, Hiroyasu
    Murakami, Mahoko
    Kikuchi, Hisaji
    Matsumura, Hideo
    Yoneyama, Takayuki
    ACTA ODONTOLOGICA SCANDINAVICA, 2011, 69 (06) : 328 - 333
  • [25] High temperature diffusion behavior between Ta-10W coating and CP-Ti and TC4 alloy
    Li, Ren
    Gu, Yi
    Zeng, Fanhao
    Li, YaQi
    Wu, Anru
    SURFACE & COATINGS TECHNOLOGY, 2021, 406
  • [26] Effect of retrogression treatments on microstructure, hardness and corrosion behaviors of aluminum alloy 7085
    Wang, Yichang
    Cao, Lingfei
    Wu, Xiaodong
    Tong, Xin
    Liao, Bin
    Huang, Guangjie
    Wang, Zhengan
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 814
  • [27] Effect of Cr, Mo and Ti on the microstructure and Vickers hardness of multi-component systems
    Gomez-Esparza, C. D.
    Camarillo-Cisneros, J.
    Estrada-Guel, I.
    Cabanas-Moreno, J. G.
    Herrera-Ramirez, J. M.
    Martinez-Sanchez, R.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 615 : S638 - S644
  • [28] Investigating the Effect of Heat Treatment on the Microstructure and Hardness of Aluminum-Lithium Alloys
    Radan, Lida
    Songmene, Victor
    Zedan, Yasser
    Samuel, Fawzy H.
    MATERIALS, 2023, 16 (19)
  • [29] Effect of Annealing Temperature on Microstructure and Mechanical Properties of Hot Swaged cp-Ti Produced by Investment Casting
    Ibrahim, Khaled M.
    Mhaede, Mansour
    Wagner, Lothar
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (01) : 114 - 118
  • [30] The effect of a small addition of boron on the sintering densification, microstructure and mechanical properties of powder metallurgy Ti-7Ni alloy
    Luo, S. D.
    Yang, Y. F.
    Schaffer, G. B.
    Qian, M.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 555 : 339 - 346