Fabrication and Mechanical Behavior of Al-Mg Alloy Ferrules

被引：1

作者：

Park, Chan Ho ^{[1
]}

Jeong, Hu Young ^{[1
]}

Eom, Gab Sik ^{[2
]}

Son, Hyeon-Taek ^{[3
]}

Yu, Hui ^{[4
]}

Park, Sung Soo ^{[1
]}

机构：

[1] Ulsan Natl Inst Sci & Technol, Ulsan 689798, South Korea

[2] Dae Kwang Co Ltd, Ulsan 680815, South Korea

[3] Korea Inst Ind Technol, Kwangju 506824, South Korea

[4] Korea Inst Mat Sci, Chang Won 642831, South Korea

来源：

KOREAN JOURNAL OF METALS AND MATERIALS | 2014年 / 52卷 / 01期

关键词：

ferrule; alloys; extrusion; mechanical properties; tensile test; YIELD RATIO; DEFORMATION; TEXTURE; SHEETS;

D O I：

10.3365/KJMM.2014.52.1.047

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Two Al-Mg alloys were subjected to extrusion for fabricating ferrules and the mechanical behavior of the extruded ferrules was investigated. To estimate the proper extrusion conditions, the power dissipation efficiency and plastic instability of the Al-Mg alloys were assessed by the construction of deformation processing maps. The Al-1.5Mg alloy ferrule had a higher work hardening capacity than the Al-0.9Mg alloy ferrule, which resulted in a higher load bearing capacity in the former during the extension test of wire rope slings.

引用

页码：47 / 53

页数：7

共 50 条

[41] Mechanical Properties Analysis of an Al-Mg Alloy Connecting Rod with Submicrometric Structure
Leon, Javier
Salcedo, Daniel
Murillo, Oscar
Luis, Carmelo J.
Fuertes, Juan P.
Puertas, Ignacio
Luri, Rodrigo
METALS, 2015, 5 (03): : 1397 - 1413
[42] MICRO-SHRINKAGE IN AND MECHANICAL-PROPERTIES OF AL-MG ALLOY CASTINGS
PRASAD, J
NAIR, CGK
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1977, 30 (06): : 379 - &
[43] Characterisation of microstructure and mechanical properties in Al-Mg alloy with addition of Sc and Zr
Jiang, F.
Zhou, J.
Huang, H.
Qu, J.
MATERIALS RESEARCH INNOVATIONS, 2014, 18 : 228 - 234
[44] The effect of scandium on the microstructure, mechanical properties and weldability of a cast Al-Mg alloy
Lathabai, S
Lloyd, PG
ACTA MATERIALIA, 2002, 50 (17) : 4275 - 4292
[45] USE OF CNT ADDITION FOR MICROSTRUCTURE AND MECHANICAL PROPERTIES MODIFICATION OF Al-Mg ALLOY
Isupov, Fedor
Panchenko, Oleg
Zamozdra, Maxim
Mushnikov, Igor
11TH INTERNATIONAL CONFERENCE ON NANOMATERIALS - RESEARCH & APPLICATION (NANOCON 2019), 2020, : 91 - 96
[46] Microstructure and mechanical properties of an Al-Mg alloy solidified under high pressures
Jie, J. C.
Zou, C. M.
Brosh, E.
Wang, H. W.
Wei, Z. J.
Li, T. J.
JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 578 : 394 - 404
[47] Effect of Mg on Mechanical Properties of Al-Mg Alloys
Caydas, Ulas
Hascalik, Ahmet
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2010, 47 (03): : 124 - 134
[48] Analysis of texture and mechanical anisotropy of Al-Mg alloy sheets for autobody applications
Young S. Han
Soon H. Hong
Suk B. Kang
Metals and Materials, 1998, 4 (3) : 386 - 390
[49] Analysis of texture and mechanical anisotropy of Al-Mg alloy sheets for autobody applications
Han, YS
Hong, SH
Kang, SB
METALS AND MATERIALS-KOREA, 1998, 4 (03): : 386 - 390
[50] Effects of Er on the microstructure and mechanical properties of an as-extruded Al-Mg alloy
Wu, Z. G.
Song, Min
He, Y. H.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 504 (1-2): : 183 - 187

← 1 2 3 4 5 →