Experimental-numerical study on strain and stress partitioning in bainitic steels with martensite-austenite constituents

To achieve safety and reliability in pipelines installed in seismic and permafrost regions, it is necessary to use linepipe materials with high strength and ductility. The introduction of dual-phase steels, e.g., with a bainite and dispersed martensite-austenite (MA) constituent, would provide the necessary ingredients for the improvement of the strain capacity (as required by a new strain-based linepipe design approach) and toughness. To fine-tune the alloy design and ensure these dual-phase steels have the required mechanical properties, an understanding of the governing deformation micromechanisms is essential. For this purpose, a recently developed joint numerical experimental approach that involves the integrated use of microscopic digital image correlation analysis, electron backscatter diffraction, and multiphysics crystal plasticity simulations with a spectral solver was employed in this study. The local strain and stress evolution and microstructure maps of representative microstructural patches were captured with a high spatial resolution using this approach. A comparison of these maps provides new insights into the deformation mechanism in dual-phase microstructures, especially regarding the influence of the bainite and MA grain size and the MA distribution on the strain localization behavior.