Properties of Ni-Co alloy coating prepared from sulphate bath

被引：2

作者：

Hagarova, Maria ^{[1
]}

Dzedzina, Rastislav ^{[1
]}

Gavendova, Petra ^{[2
]}

机构：

[1] Fac Met Kosice, Dept Mat Sci, Kosice, Slovakia

[2] SAS, Inst Mat Res, Kosice, Slovakia

来源：

METALLOGRAPHY XV | 2014年 / 782卷

关键词：

Ni - Co alloy coating; electroplating; properties; ELECTRODEPOSITION; PARAMETERS; NICKEL;

D O I：

10.4028/www.scientific.net/MSF.782.598

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The paper deals with nickel - cobalt coatings on the copper substrate prepared by electroplating process. The different Co content in the alloy coating depending on chemical composition of sulphate electrolyte and current density. The microstructure and composition of Ni-Co coating were observed with use of light and scanning electron microscopy. The mechanical properties were determined with use of the test according to EN ISO 6892-1:2009 standard and means of a Vickers microhardness tester. The results showed that under the same bath composition and technological parameters of process the Ni-Co alloy coating exhibited laminated structure. Their strength and hardness of the deposited coatings were higher than those for the Ni coatings.

引用

页码：598 / +

页数：2

共 11 条

[1]

Abd El-Rehim S.S., 1985, J APPL ELECTROCHEM, V26, P413

[2] The influence of electrolysis parameters on the composition and morphology of Co-Ni alloys [J].