Effects of sintering temperature and initial compaction load on alpha-alumina membrane support quality

被引：21

作者：

Barma, Sanjib ^{[1
]}

Mandal, Bishnupada ^{[1
]}

机构：

[1] Indian Inst Technol Guwahati, Dept Chem Engn, Gauhati 781039, India

来源：

CERAMICS INTERNATIONAL | 2014年 / 40卷 / 07期

关键词：

Sintering; alpha-alumina; Compaction load; Pore size; MICROSTRUCTURAL EVOLUTION; PERFORMANCE; POWDER;

D O I：

10.1016/j.ceramint.2014.03.134

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

This work reports the effect of sintering temperature and compaction load on the quality of a-alumina (similar to particle size < 1 mu m) membrane support for dry compaction method. We analyzed the membrane synthesis process to get good quality membrane support in a more economical way by reducing the holding time (4 h) at different sintering temperatures. The effect of initial compaction load on porosity, pore size, flexural strength and shrinkage during synthesis of alpha-alumina support at various sintering temperatures was investigated. It was found that at 1500 degrees C sintering temperature and 350 IN compaction load, the support exhibited least porosity of similar to 1.4% and least pore sizes of 67 rim, whereas at 1200 degrees C and 50 kN compaction load, the support showed the highest porosity of similar to 55% and highest pore size of similar to 505 nm.Maximum flexural strength of similar to 200 MPa was obtained for the support synthesized at 1500 degrees C sintering temperature and 350 kN load. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

引用

页码：11299 / 11309

页数：11

共 19 条

[1] Hydrogen membrane separation techniques [J].

Adhikari, S ;

Fernando, S .

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2006, 45 (03) :875-881

[2] Influence of processing atmosphere on the microstructural evolution of submicron alumina powder during sintering [J].

Chinelatto, A. S. A. ;

Tomasi, R. .

CERAMICS INTERNATIONAL, 2009, 35 (07) :2915-2920

[3]

COELHO ACV, 2007, MAT RES, V10, P183, DOI DOI 10.1590/S1516-14392007000200015

[4] Effect of high energy ball milling on compressibility and sintering behavior of alumina nanoparticles [J].

Eskandari, A. ;

Aminzare, M. ;

Hesabi, Z. Razavi ;

Aboutalebi, S. H. ;

Sadrnezhaad, S. K. .

CERAMICS INTERNATIONAL, 2012, 38 (04) :2627-2632

[5] Initial sintering stage pore growth mechanism applied to the manufacture of ceramic membrane supports [J].

Falamaki, C ;

Afarani, MS ;

Aghaie, A .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2004, 24 (08) :2285-2292

[6] USEFUL EXTENSIONS OF THE STATISTICAL-THEORY OF SINTERING [J].

FANG, TT ;

PALMOUR, H .

CERAMICS INTERNATIONAL, 1989, 15 (06) :329-335

[7] CONSTANT HEATING RATE ANALYSIS OF SIMULTANEOUS SINTERING MECHANISMS IN ALUMINA [J].

HILLMAN, SH ;

GERMAN, RM .

JOURNAL OF MATERIALS SCIENCE, 1992, 27 (10) :2641-2648

[8] TEST OF 2ND-PHASE AND IMPURITY-SEGREGATION MODELS FOR MGO-ENHANCED DENSIFICATION OF SINTERED ALUMINA [J].

JOHNSON, WC ;

COBLE, RL .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1978, 61 (3-4) :110-114

[9] Ordered mesoporous membranes: Effects of support and surfactant removal conditions on membrane quality [J].

Kumar, P. ;

Ida, J. ;

Kim, S. ;

Guliants, V. V. ;

Lin, J. Y. S. .

JOURNAL OF MEMBRANE SCIENCE, 2006, 279 (1-2) :539-547

[10]

Levanen E., 1994, P S 3 INT C INV MORP, P549

← 1 2 →