The Effect of Direct Electric Current on the Plastic Behavior of AA7075 Aluminum Alloy in Different States of Hardening

被引：13

作者：

Dobras, Daniel ^{[1
]}

Bruschi, Stefania ^{[2
]}

Simonetto, Enrico ^{[2
]}

Rutkowska-Gorczyca, Malgorzata ^{[3
]}

Ghiotti, Andrea ^{[2
]}

机构：

[1] Wroclaw Univ Sci & Technol, Dept Met Forming & Metrol, 7-9 Ignacego Lukasiewicza St, PL-50371 Wroclaw, Poland

[2] Univ Padua, Dept Ind Engn, Via Venezia 1, I-35131 Padua, Italy

[3] Wroclaw Univ Sci & Technol, Dept Automot Engn, Wyb Wyspianskiego 27, PL-50370 Wroclaw, Poland

来源：

MATERIALS | 2021年 / 14卷 / 01期

关键词：

aluminum alloy; formability; electrically-assisted forming; electroplastic effect; electron wind theory; Portevin-Le Chatelier effect; UNIAXIAL TENSION; SERRATED FLOW; PORTEVIN; DEFORMATION; PRECIPITATION;

D O I：

10.3390/ma14010073

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Electrically-Assisted Forming (EAF) techniques are interesting and promising for the automotive industry. Electrically-assisted tensile tests were carried out on specimens of AA7075 aluminum alloy in different states of hardening, namely T6 (the as-received state) and the supersaturated solid solution state. All the tests were carried out in quasi-static conditions under the application of direct electric current (DC) in the range of 90 to 540 A. The experimental results showed that with a DC density of 10 A/mm(2) the uniform strain and strain at fracture increased when the AA7075 was in the supersaturated solid solution state. A correlation between the mechanical results and microstructural features analysed through transmission electron microscopy was assessed. An explanation of the investigated phenomena based on the electron wind theory, heterogeneous microscale Joule heating and the Portevin-Le Chatelier (PLC) effect was finally proposed.

引用

页码：1 / 14

页数：13

共 28 条

[21] The effect of precipitation on the Portevin-Le Chatelier effect in an Al-Zn-Mg-Cu alloy [J].

Thevenet, D ;

Mliha-Touati, M ;

Zeghloul, A .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 266 (1-2) :175-182

[22] Behaviors and modeling of thermal forming limits of AA7075 aluminum sheet [J].

Xiao, Wenchao ;

Wang, Baoyu .

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2020, 20 (01)

[23] Minimizing serrated flow in Al-Mg alloys by electroplasticity [J].

Xu, Hui ;

Liu, Xuebing ;

Zhang, Di ;

Zhang, Xinfang .

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2019, 35 (06) :1108-1112

[24] Rapid precipitation of T-phase in the 2024 aluminum alloy via cyclic electropulsing treatment [J].

Xu, Xiaofeng ;

Zhao, Yuguang ;

Ma, Bingdong ;

Zhang, Ming .

JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 610 :506-510

[25] The Portevin-Le Chatelier effect: a review of experimental findings [J].

Yilmaz, Ahmet .

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2011, 12 (06)

[26] The Effect of Pulse Electric Current on the Mechanical Properties and Fracture Behaviors of Aluminum Alloy AA5754 [J].

Zhao, Kunmin ;

Fan, Rong .

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2016, 138 (04)

[27] The Effect of Electric Current and Strain Rate on Serrated Flow of Sheet Aluminum Alloy 5754 [J].

Zhao, Kunmin ;

Fan, Rong ;

Wang, Limin .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016, 25 (03) :781-789

[28]

Zimniak Z, 2008, ARCH CIV MECH ENG, V8, P173, DOI 10.1016/S1644-9665(12)60204-0

← 1 2 3 →