STABILITY OF THE BOND BETWEEN TWO RESIN CEMENTS AND AN YTTRIA-STABILIZED ZIRCONIA CERAMIC AFTER SIX MONTHS OF AGING IN WATER

被引:77
作者
da Silva, Eduardo M. [1 ]
Miragaya, Luciana [1 ]
Sabrosa, Carlos Eduardo [2 ]
Maia, Lucianne C. [3 ]
机构
[1] Univ Fed Fluminense, Sch Dent, Analyt Lab Restorat Biomat LABiom R, Rio De Janeiro, Brazil
[2] Univ Estado Rio de Janeiro, Sch Dent, Dept Restorat Dent, BR-20550011 Rio De Janeiro, Brazil
[3] Univ Fed Rio de Janeiro, Sch Dent, Dept Pediat Dent & Orthodont, BR-24020140 Niteroi, RJ, Brazil
关键词
STRENGTH; MICROSTRUCTURE; DURABILITY; ADHESION;
D O I
10.1016/j.prosdent.2013.12.003
中图分类号
R78 [口腔科学];
学科分类号
1003 ;
摘要
Statement of the problem. The behavior of the luting cement and the cementation protocol are essential in the clinical success of ceramic restorations. Purpose. The purpose of this study was to evaluate the bond stability of 2 resin cements and a yttria-stabilized tetragonal polycrystalline zirconia (Y-TZP) ceramic submitted to 2 surface treatments. Material and methods. Sixty plates of a Y-TZP ceramic were assigned to 3 groups according to the surface treatments: control, as sintered surface; methacryloxydecyl dihydrogen phosphate (MDP), coated with an MDP-based primer, and tribochemical silica-coating (TSC), coated with tribochemical silica. The plates of each group were further divided into 2 subgroups according to the resin cement as follows: RelyX adhesive resin cement (conventional) and RelyX Unicem (self-adhesive). Cylinders of resin cements (circle divide=0.75 mm x 0.5 mm in height) were built up on the ceramic surFaces, and the plates stored in distilled water at 37 C for either 24 hours or 6 months before being submitted to a microshear bond strength test. The data were submitted to 3-way ANOVA and the Tukey honestly significant difference test (alpha=.05). Results. Three-way ANOVA showed statistical significance for the 3 independent factors: resin cement, surface treatment, and period of water immersion (P<.001). Unicem presented the highest microshear bond strength after 24 hours (MDP, 37.4 +/- 2.3 and TSC, 36.2 +/- 2.1 MPa). Except for RelyX adhesive resin cement applied on ceramic surfaces treated with TSC, the microshear bond strength of all the other groups decreased after 6 months of aging in water. The microshear bond strength decreased most in the control groups (-81.5% for ARC and -93.1% for Unicem). In the group treated with TSC, the microshear bond strength for Unicem decreased by 54.8% and in that treated with MDP-based primer by -42.5%. In the group treated with MDP-based primer, the microshear bond strength for RelyX ARC decreased by -52.8%. Conclusions. Irrespective of surface treatments, self-adhesive resin cement was not able to maintain the bond to Y-TZP ceramic after 6 months of aging in water.
引用
收藏
页码:568 / 575
页数:8
相关论文
共 45 条
[1]   Evaluation of Zirconia/Resin Bond Strength and Interface Quality Using a New Technique [J].
Aboushelib, Moustafa N. .
JOURNAL OF ADHESIVE DENTISTRY, 2011, 13 (03) :255-260
[2]   Innovations in bonding to zirconia-based materials. Part II: Focusing on chemical interactions [J].
Aboushelib, Moustafa N. ;
Mirmohamadi, Hesam ;
Matinlinna, Jukka P. ;
Kukk, Edwin ;
Ounsi, Hani F. ;
Salameh, Ziad .
DENTAL MATERIALS, 2009, 25 (08) :989-993
[3]   Low-temperature degradation of a Y-TZP ceramic after surface treatments [J].
Amaral, Marina ;
Valandro, Luiz Felipe ;
Bottino, Marco A. ;
Souza, Rodrigo O. A. .
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2013, 101 (08) :1387-1392
[4]   Bond strength of three luting agents to zirconia ceramic - influence of surface treatment and thermocycling [J].
Attia, Ahmed .
JOURNAL OF APPLIED ORAL SCIENCE, 2011, 19 (04) :388-395
[5]   Efficacy of Surface Treatments on the Bond Strength of Resin Cements to Two Brands of Zirconia Ceramic [J].
Baldissara, Paolo ;
Querze, Marco ;
Monaco, Carlo ;
Scotti, Roberto ;
Fonseca, Renata Garcia .
JOURNAL OF ADHESIVE DENTISTRY, 2013, 15 (03) :259-267
[6]  
Blatz Markus B, 2004, J Esthet Restor Dent, V16, P324, DOI 10.1111/j.1708-8240.2004.tb00061.x
[7]   In vitro comparative bond strength of contemporary self-adhesive resin cements to zirconium oxide ceramic with and without air-particle abrasion [J].
Blatz, Markus B. ;
Phark, Jin-Ho ;
Ozer, Fusun ;
Mante, Francis K. ;
Saleh, Najeed ;
Bergler, Michael ;
Sadan, Avishai .
CLINICAL ORAL INVESTIGATIONS, 2010, 14 (02) :187-192
[8]   Resin-ceramic bonding: a review of the literature [J].
Blatz, MB ;
Sadan, A ;
Kern, M .
JOURNAL OF PROSTHETIC DENTISTRY, 2003, 89 (03) :268-274
[9]  
Blatz MB, 2002, QUINTESSENCE INT, V33, P415
[10]   Effect of water aging on microtensile bond strength of dual-cured resin cements to pre-treated sintered zirconium-oxide ceramics [J].
Castillo Oyague, Raquel ;
Monticelli, Francesca ;
Toledano, Manuel ;
Osorio, Estrella ;
Ferrari, Marco ;
Osorio, Raquel .
DENTAL MATERIALS, 2009, 25 (03) :392-399