Remendable thermosetting polymers for isocyanate-free adhesives: a preliminary study

This study describes the synthesis and polymerization of a dicyclocarbonate Diels-Alder (DA) adduct to give a thermoresponsive non-isocyanate polyurethane (NIPU). Firstly a model adduct was synthesized by DA reaction between N-methylmaleimide and furfuryl cyclocarbonate ether (FCE). This adduct was characterized by H-1-NMR and its thermal behavior was studied by H-1-NMR, and differential scanning calorimetry (DSC). Then a telechelic dicyclocarbonate DA adduct was obtained by DA reaction between a bismaleimide oligomer and FCE in bulk with full conversion. Its thermal behavior was studied by thermogravimetric analysis (TGA) and DSC. The dicyclocarbonate adduct was polymerized by step-growth polymerization with a diamine, Jeffamine EDR148. The polymerization was performed at room temperature (in order to avoid adduct deprotection) with triazabicyclodecene as the catalyst. The obtained polymer was characterized by size exclusion chromatography (SEC) and H-1-NMR. The polymer thermal behavior was fully characterized by three complementary analyses. By DSC, retro-Diels-Alder temperatures could be measured to be 90-120 degrees C. By a H-1-NMR kinetic study at 100 degrees C, it could be shown that after 120 min at 100 degrees C, 85% of the adducts are deprotected. Finally, by SEC, it was demonstrated that the obtained NIPU polymer chains undergo thermal scission by rDA reaction.