Rate-dependent function in the correlation between hardness and yield stress of polyethylene composites

被引:11
|
作者
Suwanprateeb, J [1 ]
机构
[1] Minist Sci Technol & Environm, Natl Met & Mat Technol Ctr, Natl Sci & Technol Dev Agcy, Bangkok 10400, Thailand
关键词
D O I
10.1002/pc.10181
中图分类号
TB33 [复合材料];
学科分类号
摘要
A study of the validity of a correlation between compressive yield stress and Vickers hardness of CaCO3/high density polyethylene composites was carried out. Composites with calcium carbonate in the range of 0-0.40 were produced by twin screw extrusion followed by compression molding. Hardness was implemented by indenting the samples with Vickers indenter and compression test were carried out at various crosshead speeds in the range of 0.2-50 mm min(-1). It was found that increasing calcium carbonate content increased both hardness and yield stress. In addition, compressive yield stress increased with increasing crosshead speed. The correlation between hardness and yield stress was observed to be independent on filler content and valid when the deformation rate employed in both tests were within the similar ranges which was in the order of 10(-1) mm min(-1). Tabor's equation was modified to take into account for the rate-dependent behavior of composites and was found to be applicable and yield relatively accurate results.
引用
收藏
页码:238 / 244
页数:7
相关论文
共 50 条
  • [21] The correlation between hardness and yield strength of hard materials
    Vandeperre, LJ
    Clegg, WJ
    FUNCTIONALLY GRADED MATERIALS VIII, 2005, 492-493 : 555 - 560
  • [22] Correlation between yield stress and hardness of nickel-silicon-boron-based alloys by nanoindentation
    Serban, Viorel-Aurel
    Codrean, Cosmin
    Voda, Mircea
    Chicot, Didier
    Decoopman, Xavier
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 605 : 294 - 300
  • [23] A STRIP-YIELD RATE-DEPENDENT MODEL FOR RAPID LOADING CONDITIONS
    NILSSON, F
    OHLSSON, P
    SJOBERG, F
    STAHLE, P
    ENGINEERING FRACTURE MECHANICS, 1989, 33 (03) : 429 - 436
  • [24] Correlation between hardness and polymerization of dental composites.
    Valecarcel, J
    Pelissier, B
    Tramini, P
    Duret, F
    JOURNAL OF DENTAL RESEARCH, 2002, 81 : B270 - B270
  • [25] RATE-DEPENDENT STRESS-STRAIN BEHAVIOR OF POLYMERIC MATERIALS
    SADD, MH
    MORRIS, DH
    JOURNAL OF APPLIED POLYMER SCIENCE, 1976, 20 (02) : 421 - 433
  • [26] Rate-Dependent and Long-Term Yield Stress and Strength of Soft Wenzhou Marine Clay: Experiments and Modeling
    Yin, Zhen-Yu
    Yin, Jian-Hua
    Huang, Hong-Wei
    MARINE GEORESOURCES & GEOTECHNOLOGY, 2015, 33 (01) : 79 - 91
  • [27] A RATE-DEPENDENT STRESS-STRAIN RELATIONSHIP FOR SEA ICE
    WANG, YS
    JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 1983, 105 (01): : 2 - 5
  • [28] Mesomechanical Simulation of Rate-Dependent Mechanical Behavior for Triaxially Braided Composites
    Xing, Jun
    Zhao, Zhenqiang
    He, Xin
    Zhang, Chao
    Li, Yulong
    EARTH AND SPACE 2018: ENGINEERING FOR EXTREME ENVIRONMENTS, 2018, : 645 - 654
  • [29] A rate-dependent model for predicting damage accumulation in viscoelastic laminated composites
    Allen, DH
    EXPERIMENTAL TECHNIQUES AND DESIGN IN COMPOSITE MATERIALS 5, 2002, 221-2 : 25 - 34
  • [30] Anisotropic rate-dependent saturation functions for compositional simulation of sandstone composites
    Boon, Maartje
    Matthai, Stephan K.
    Shao, Qi
    Youssef, AbdAllah A.
    Mishra, Achyut
    Benson, Sally M.
    JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, 2022, 209