共 50 条
Slurry erosion-corrosion resistance and microbial corrosion electrochemical characteristics of HVOF sprayed WC-10Co-4Cr coating for offshore hydraulic machinery
被引:66
作者:
Hong, Sheng
[1
,2
,3
]
Wu, Yuping
[1
,3
]
Gao, Wenwen
[1
]
Zhang, Jianfeng
[1
]
Zheng, Yugui
[3
]
Zheng, Yuan
[4
]
机构:
[1] Hohai Univ, Coll Mech & Mat, 8 Focheng West Rd, Nanjing 211100, Jiangsu, Peoples R China
[2] Mat Corros & Protect Key Lab Sichuan Prov, 180 Xueyuan St, Zigong 643000, Peoples R China
[3] Chinese Acad Sci, Inst Met Res, Key Lab Nucl Mat & Safety Assessment, 62 Wencui Rd, Shenyang 110016, Liaoning, Peoples R China
[4] Hohai Univ, Natl Engn Res Ctr Water Resources Efficient Utili, 1 Xikang Rd, Nanjing 210098, Jiangsu, Peoples R China
基金:
中国国家自然科学基金;
中国博士后科学基金;
关键词:
High-velocity oxygen-fuel;
Slurry erosion;
Microbial influenced corrosion;
Sulfate-reducing bacteria;
WC-10Co-4Cr;
WC-COCR COATINGS;
SULFATE-REDUCING BACTERIA;
SLIDING WEAR BEHAVIOR;
IMPEDANCE SPECTROSCOPY;
MECHANICAL-PROPERTIES;
WC/CO HARDMETALS;
COATED STEELS;
CR;
MICROSTRUCTURE;
TEMPERATURE;
D O I:
10.1016/j.ijrmhm.2018.02.019
中图分类号:
T [工业技术];
学科分类号:
08 ;
摘要:
The slurry erosion-corrosion and microbial corrosion electrochemical behavior of high-velocity oxygen-fuel (HVOF) sprayed WC-10Co-4Cr cermet coatings and the reference stainless steel 1Cr18Ni9Ti were both investigated. The slurry erosion-corrosion test was performed in a rotating disk rig facility with circulating system using distilled water and 3.5 wt% NaCl slurries. The microbial influenced corrosion behavior in the presence of SRB was evaluated by electrochemical measurement. The results showed that WC-10Co-4Cr coating exhibited higher slurry erosion-corrosion resistance compared to the stainless steel 1Cr18Ni9Ti in both distilled water and 3.5 wt% NaCl slurries. The evolution of the slurry erosion mechanism of the coatings with the augment of NaCl concentration was cracks and microchipping in distilled water slurry, and a combination of detachment of binder phase, microchipping and fragments in 3.5 wt% NaCl slurry. Potentiodynamic polarization and electrochemical impendence spectroscopy (EIS) results showed that the WC-10Co-4Cr coating had a comparable microbial influenced corrosion resistance in seawater with SRB as compared to the stainless steel 1Cr18Ni9Ti.
引用
收藏
页码:7 / 13
页数:7
相关论文