The Pitting Corrosion Behavior of the Austenitic Stainless Steel 308L-316L Welded Joint

被引：7
|
作者：
He, Jinshan [1 ]
Xu, Shiguang [1 ]
Ti, Wenxin [1 ,2 ]
Han, Yaolei [2 ]
Mei, Jinna [2 ]
Wang, Xitao [1 ,3 ]
机构：
[1] Univ Sci & Technol Beijing, Collaborat Innovat Ctr Steel Technol, Beijing 100083, Peoples R China
[2] Suzhou Nucl Power Res Inst, Suzhou 215004, Peoples R China
[3] Qilu Univ Technol, Adv Mat Inst, Shandong Prov Key Lab High Strength Lightweight M, Shandong Acad Sci, Jinan 250353, Peoples R China
来源：
METALS | 2020年 / 10卷 / 09期
关键词：
308L-316L welded joint; microstructure; pitting corrosion; residual strain; HEAT-AFFECTED ZONE; GRAIN-BOUNDARY; RESISTANCE; MICROSTRUCTURE; CRACKING; METAL;
D O I：
10.3390/met10091258
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The pitting corrosion resistance of the austenitic stainless steel 308L-316L welded joint was investigated by electrochemical tests. It is found that the weld zone was the most critical for pits to initiate in the welded joint due to relatively instable passive film with few Mo and inhomogeneous passive film induced by multiple (Mn, Al, and Si) oxides and continuous network of 13.94 vol.% delta ferrites. By statistical analysis, 53.8% pits initiated at (Mn, Al, and Si) oxides, 23.0% in austenite, and 23.2% at interface between ferrite and austenite. In addition, heat-affected zone was prone to have pitting corrosion compared with the base metal since residual strain was much higher in the region.
引用
收藏
页码：1 / 12
页数：12
相关论文
共 50 条
  • [31] Effect of scratching on the microstructure and pitting corrosion of 304L stainless steel
    Li, Chengtao
    Chen, Zhilin
    Song, Lijun
    Liu, Hongqun
    Liu, Zhong
    Sun, Yongliang
    Wang, Jun
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2025, 86 (03) : 202 - 207
  • [32] Corrosion resistance enhancement and microstructural analysis of hull structural steel/316L stainless steel dissimilar welded joint
    Liu, Zhiwei
    Huang, Wenjun
    Wu, Manhang
    Li, Chen
    Kong, Jizhou
    Wang, Qianzhi
    Zhou, Fei
    MATERIALS TODAY COMMUNICATIONS, 2025, 42
  • [33] Detection of Grinding-Induced Corrosion Susceptibility of Austenitic Stainless Steel 316 L Using Electrochemical and Analytical Methods
    Rosemann, Paul
    Michael, Oliver
    Schumacher, Markus
    Ecke, Martin
    Huetter, Sebastian
    Rossberg, Saskia
    Ginard, Gabriele
    Heyn, Andreas
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2025,
  • [34] Effects of mechanical stress on the corrosion behaviour of an austenitic stainless steel welded joint - Stress corrosion cracking susceptibility
    Silva, Laura
    Ducommun, Nadege
    Jubin, Laurent
    Mainguy, Ronan
    Thebault, Yannick
    Andrieu, Eric
    Blanc, Christine
    CORROSION SCIENCE, 2025, 244
  • [35] Investigation of Structure Property Relationship of the Dissimilar Weld Between Austenitic Stainless Steel 316L and Duplex Stainless Steel 2205
    Jebaraj, A. Vinoth
    Kumar, T. Sampath
    Manikandan, M.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (10) : 2593 - 2604
  • [36] Corrosion Behavior of Sintered 316L Stainless Steel Fibre Porous Felt
    Ao Qingbo
    Tang Huiping
    Wang Jianzhong
    Zhi Hao
    Ma Jun
    Li Bin
    RARE METAL MATERIALS AND ENGINEERING, 2014, 43 (10) : 2344 - 2348
  • [37] On the Influence of Cold Working and Electrochemical Nitridation on the Corrosion Behaviour of 316L Austenitic Stainless Steel in Acidic Environment
    Tandona, Vipin
    Patil, Awanikumar P.
    SURFACE ENGINEERING AND APPLIED ELECTROCHEMISTRY, 2020, 56 (01) : 63 - 70
  • [38] Electrochemical noise comparative study of pitting corrosion of 316L stainless steel fabricated by selective laser melting and wrought
    Zhang, Zhen
    Yuan, Xinlong
    Zhao, Zhanyong
    Li, Xiaofeng
    Liu, Bin
    Bai, Peikang
    JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 2021, 894
  • [39] Effect of cold rolling on the pitting corrosion of 316L and 304 austenitic stainless steels
    Gao, Zhenhuan
    Wang, Ruijun
    Li, Jinxu
    Xu, Lining
    Qiao, Lijie
    JOURNAL OF MATERIALS SCIENCE, 2022, 57 (43) : 20503 - 20520
  • [40] Acoustic emission detection of 316L stainless steel welded joints during intergranular corrosion
    Chai, Meng-yu
    Duan, Quan
    Bai, Wen-jie
    Zhang, Zao-xiao
    Xie, Xu-meng
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2015, 22 (09) : 942 - 949
12345