The Pitting Corrosion Behavior of the Austenitic Stainless Steel 308L-316L Welded Joint

被引：7
|
作者：
He, Jinshan [1 ]
Xu, Shiguang [1 ]
Ti, Wenxin [1 ,2 ]
Han, Yaolei [2 ]
Mei, Jinna [2 ]
Wang, Xitao [1 ,3 ]
机构：
[1] Univ Sci & Technol Beijing, Collaborat Innovat Ctr Steel Technol, Beijing 100083, Peoples R China
[2] Suzhou Nucl Power Res Inst, Suzhou 215004, Peoples R China
[3] Qilu Univ Technol, Adv Mat Inst, Shandong Prov Key Lab High Strength Lightweight M, Shandong Acad Sci, Jinan 250353, Peoples R China
来源：
METALS | 2020年 / 10卷 / 09期
关键词：
308L-316L welded joint; microstructure; pitting corrosion; residual strain; HEAT-AFFECTED ZONE; GRAIN-BOUNDARY; RESISTANCE; MICROSTRUCTURE; CRACKING; METAL;
D O I：
10.3390/met10091258
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The pitting corrosion resistance of the austenitic stainless steel 308L-316L welded joint was investigated by electrochemical tests. It is found that the weld zone was the most critical for pits to initiate in the welded joint due to relatively instable passive film with few Mo and inhomogeneous passive film induced by multiple (Mn, Al, and Si) oxides and continuous network of 13.94 vol.% delta ferrites. By statistical analysis, 53.8% pits initiated at (Mn, Al, and Si) oxides, 23.0% in austenite, and 23.2% at interface between ferrite and austenite. In addition, heat-affected zone was prone to have pitting corrosion compared with the base metal since residual strain was much higher in the region.
引用
收藏
页码：1 / 12
页数：12
相关论文
共 50 条
  • [1] Microstructure and corrosion behavior of the heat affected zone of a stainless steel 308L-316L weld joint
    Ma, Cheng
    Peng, Qunjia
    Mei, Jinna
    Han, En-Hou
    Ke, Wei
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2018, 34 (10) : 1823 - 1834
  • [2] Stress corrosion cracking in the heat affected zone of a stainless steel 308L-316L weld joint in primary water
    Dong, Lijin
    Peng, Qunjia
    Han, En-Hou
    Ke, Wei
    Wang, Lei
    CORROSION SCIENCE, 2016, 107 : 172 - 181
  • [3] Galvanic Coupling Effect on Pitting Corrosion of 316L Austenitic Stainless Steel Welded Joints
    Sriba, Amina
    Vogt, Jean-Bernard
    METALS AND MATERIALS INTERNATIONAL, 2021, 27 (12) : 5258 - 5267
  • [4] An investigation on microstructure and pitting corrosion behavior of 316L stainless steel weld joint
    Zhu, Ping
    Cao, Xinyuan
    Wang, Wei
    Zhao, Jiancang
    Lu, Yonghao
    Shoji, Tetsuo
    JOURNAL OF MATERIALS RESEARCH, 2017, 32 (20) : 3904 - 3911
  • [5] Pitting and stress corrosion cracking behavior in welded austenitic stainless steel
    Lu, BT
    Chen, ZK
    Luo, JL
    Patchett, BM
    Xu, ZH
    ELECTROCHIMICA ACTA, 2005, 50 (06) : 1391 - 1403
  • [6] Role of Te-RE alloying on the passive film and pitting corrosion behavior of 316L stainless steel
    Che, Zhichao
    Revilla, Reynier I.
    Li, Can
    Liu, Jing
    Liu, Wei
    Wouters, Benny
    Marcoen, Kristof
    Cheng, Xuequn
    Liu, Chao
    Li, Xiaogang
    CORROSION SCIENCE, 2024, 240
  • [7] Study on Corrosion Resistance of 316L Stainless Steel Welded Joint
    Han Liqing
    Lin Guobiao
    Wang Zidong
    Zhang Hong
    Li Feng
    You Long
    RARE METAL MATERIALS AND ENGINEERING, 2010, 39 (03) : 393 - 396
  • [8] Microstructural evolution and pitting corrosion behavior of friction stir welded joint of high nitrogen stainless steel
    Zhang, H.
    Wang, D.
    Xue, P.
    Wu, L. H.
    Ni, D. R.
    Ma, Z. Y.
    MATERIALS & DESIGN, 2016, 110 : 802 - 810
  • [9] Effect of grain size on pitting corrosion of 304L austenitic stainless steel
    Aghuy, A. Abbasi
    Zakeri, M.
    Moayed, M. H.
    Mazinani, M.
    CORROSION SCIENCE, 2015, 94 : 368 - 376
  • [10] Crystallographic effects in corrosion of austenitic stainless steel 316L
    Lindell, D.
    Pettersson, R.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2015, 66 (08): : 727 - 732
12345