Hydrogen-free nitriding of ZrTiAlV by double glow plasma discharge improving the wear resistance

被引：10

作者：

Ai, X. Y. ^{[1
]}

Lin, H. L. ^{[1
]}

Zhang, B. ^{[1
]}

Lv, J. W. ^{[1
]}

Jing, Q. ^{[1
]}

Liu, R. P. ^{[1
]}

机构：

[1] Yanshan Univ, State Key Lab Metastable Mat Sci & Technol, Qinhuangdao 066004, Hebei, Peoples R China

来源：

MATERIALS SCIENCE AND TECHNOLOGY | 2018年 / 34卷 / 11期

关键词：

ZrTiAlV alloy; double glow plasma; hydrogen-free nitriding; hardness; wear resistance; ZIRCONIUM-ALLOY; TRIBOLOGICAL PROPERTIES; PURE TITANIUM; SURFACE; BEHAVIOR; MICROSTRUCTURE; CORROSION; STEEL; CARBURIZATION; COATINGS;

D O I：

10.1080/02670836.2018.1446266

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A hydrogen-free nitriding method through double glow plasma metallurgy is exploited and a nitrided layer was formed on ZrTiAlV alloy. The nitrided layer was characterised through X-ray diffraction, optical microscopy, scanning electron microscopy and energy-dispersive spectroscopy techniques, as well as through Vickers hardness and friction and wear tests. Results showed that the nitrided layer is 580 mu m thick, homogeneous and dense. It mainly consists of TiN, Ti2N and ZrN phases. The hardness of the nitrided layer on the surface of the ZrTiAlV alloy is nearly 2.5 times higher than that of the ZrTiAlV substrate. The friction coefficient and wear resistance of the alloy considerably improved after nitriding.

引用

页码：1303 / 1308

页数：6

共 28 条

[1] Characterization of bilayer coatings of TiN/ZrN grown using pulsed arc PAPVD [J].

Arias, DF ;

Arango, YC ;

Devia, A .

APPLIED SURFACE SCIENCE, 2005, 252 (04) :1175-1181

[2] Pack carburisation of commercially pure titanium with limited oxygen diffusion for improved tribological properties [J].

Bailey, R. ;

Sun, Y. .

SURFACE & COATINGS TECHNOLOGY, 2015, 261 :28-34

[3] Investigating the structure-property correlation of a novel Zirconium alloy by annealing treatment [J].

Feng, Z. H. ;

Xia, C. Q. ;

Jiang, X. J. ;

Liu, S. G. ;

Zhang, X. ;

Zhang, X. Y. ;

Ma, M. Z. ;

Liu, R. P. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 677 :393-399

[4] A review of micro-scale abrasion testing [J].

Gant, A. J. ;

Gee, M. G. .

JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2011, 44 (07)

[5] Progress towards standardisation of ball cratering [J].

Gee, MG ;

Gant, A ;

Hutchings, I ;

Bethke, R ;

Schiffman, K ;

Van Acker, K ;

Poulat, S ;

Gachon, Y ;

von Stebut, J .

WEAR, 2003, 255 :1-13

[6] Crack and wear behavior of SiC particulate reinforced aluminium based metal matrix composite fabricated by direct metal laser sintering process [J].

Ghosh, Subrata Kumar ;

Saha, Partha .

MATERIALS & DESIGN, 2011, 32 (01) :139-145

[7] Improved nitrogen transport in steels during surface nanocrystallized low-carbon gaseous nitridation [J].

Gu, JF ;

Bei, DH ;

Pan, JS ;

Lu, J ;

Lu, K .

MATERIALS LETTERS, 2002, 55 (05) :340-343

[8] Cyclic deformation and fatigue behavior of carburized automotive gear steel and predictions including multiaxial stress states [J].

Jo, Bonglae ;

Sharifimehr, Shahriar ;

Shim, Yongbo ;

Fatemi, Ali .

INTERNATIONAL JOURNAL OF FATIGUE, 2017, 100 :454-465

[9] Corrosion and microstructural characteristics of Zr-Nb alloys with different Nb contents [J].

Kim, Hyun Gil ;

Park, Sang Yoon ;

Lee, Myung Ho ;

Jeong, Yong Hwan ;

Kim, Sun Doo .

JOURNAL OF NUCLEAR MATERIALS, 2008, 373 (1-3) :429-432

[10] Effects of annealing treatments on microstructure and mechanical properties of the Zr-45Ti-5Al-3V alloy [J].

Liang, S. X. ;

Yin, L. X. ;

Liu, X. Y. ;

Jing, R. ;

Zhou, Y. K. ;

Ma, M. Z. ;

Liu, R. P. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 582 :374-378

← 1 2 3 →