Night time performance of a storage integrated solar thermophotovoltaic (SISTPV) system

被引:37
作者
Veeraragavan, A. [1 ]
Montgomery, L. [1 ]
Datas, A. [2 ]
机构
[1] Univ Queensland, Sch Mech & Min Engn, Brisbane, Qld 4072, Australia
[2] Univ Politecn Madrid, Inst Energia Solar, E-28040 Madrid, Spain
关键词
Solar energy; Thermal storage; Phase change material; Photovoltaics; Concentrating solar power; Solar thermophotovoltaics; SOLIDIFICATION; EFFICIENCY;
D O I
10.1016/j.solener.2014.07.005
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Energy storage at low maintenance cost is one of the key challenges for generating electricity from the solar energy. This paper presents the theoretical analysis (verified by CFD) of the night time performance of a recently proposed conceptual system that integrates thermal storage (via phase change materials) and thermophotovoltaics for power generation. These storage integrated solar thermophotovoltaic (SISTPV) systems are attractive owing to their simple design (no moving parts) and modularity compared to conventional Concentrated Solar Power (CSP) technologies. Importantly, the ability of high temperature operation of these systems allows the use of silicon (melting point of 1680 K) as the phase change material (PCM). Silicon's very high latent heat of fusion of 1800 kJ/kg and low cost ($1.70/kg), makes it an ideal heat storage medium enabling for an extremely high storage energy density and low weight modular systems. In this paper, the night time operation of the SISTPV system optimised for steady state is analysed. The results indicate that for any given PCM length, a combination of small taper ratio and large inlet hole-to-absorber area ratio are essential to increase the operation time and the average power produced during the night time. Additionally, the overall results show that there is a trade-off between running time and the average power produced during the night time. Average night time power densities as high as 30 W/cm(2) are possible if the system is designed with a small PCM length (10 cm) to operate just a few hours after sun-set, but running times longer than 72 h (3 days) are possible for larger lengths (50 cm) at the expense of a lower average power density of about 14 W/cm(2). In both cases the steady state system efficiency has been predicted to be about 30%. This makes SISTPV systems to be a versatile solution that can be adapted for operation in a broad range of locations with different climate conditions, even being used off-grid and in space applications. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:377 / 389
页数:13
相关论文
共 31 条
  • [1] Alexiades V, 2018, Mathematical modeling of melting and freezing processes
  • [2] ABSOLUTE LIMITING EFFICIENCIES FOR PHOTOVOLTAIC ENERGY-CONVERSION
    ARAUJO, GL
    MARTI, A
    [J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 1994, 33 (02) : 213 - 240
  • [3] Thermophotovoltaics: Basic principles and critical aspects of system design
    Bauer T.
    [J]. Green Energy and Technology, 2011, 7
  • [4] BRENT AD, 1988, NUMER HEAT TRANSFER, V13, P297, DOI 10.1080/10407788808913615
  • [5] Thermophotovoltaics: A new paradigm for power generation?
    Catalano, A
    [J]. RENEWABLE ENERGY, 1996, 8 (1-4) : 495 - 499
  • [6] Chubb D.L., 2007, Fundamentals of Thermophotovoltaic Energy Conversion
  • [7] Chubb DL, 1996, AIP CONF PROC, P181
  • [8] Steady state analysis of a storage integrated solar thermophotovoltaic (SISTPV) system
    Datas, A.
    Chubb, D. L.
    Veeraragavan, A.
    [J]. SOLAR ENERGY, 2013, 96 : 33 - 45
  • [9] Global optimization of solar thermophotovoltaic systems
    Datas, A.
    Algora, C.
    [J]. PROGRESS IN PHOTOVOLTAICS, 2013, 21 (05): : 1040 - 1055
  • [10] Detailed balance analysis of solar thermophotovoltaic systems made up of single junction photovoltaic cells and broadband thermal emitters
    Datas, A.
    Algora, C.
    [J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2010, 94 (12) : 2137 - 2147