A REVIEW OF COMPOSITE MATERIALS USED IN BRAKE DISC PAD MANUFACTURING PROCESS

被引：0

作者：

Szymanski, Pawel ^{[1
]}

Czarnecka-Komorowska, Dorota ^{[1
]}

Gawdzinska, Katarzyna ^{[2
]}

Trubas, Aleksandra ^{[3
]}

Kostecka, Ewelina ^{[2
]}

机构：

[1] Poznan Univ Tech, Fac Mech Engn, Inst Mat Technol, Pl M Sklodowska Curie 5, PL-60965 Poznan, Poland

[2] Maritime Univ Szczecin, Dept Machines Construct & Mat, Ul Willowa 2-4, PL-71650 Szczecin, Poland

[3] AGH Univ Sci & Technol, Fac Nonferrous Met, Al A Mickiewicza 30, PL-30059 Krakow, Poland

来源：

COMPOSITES THEORY AND PRACTICE | 2020年 / 20卷 / 02期

关键词：

brake discs; working conditions; material selection; metal-polymer composites; DRY SLIDING WEAR; CAST-IRON; BEHAVIOR; LAYER;

D O I：

暂无

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

This article presents the conditions and factors influencing the performance and requirements of brake disc materials. The wear resistance of brake discs must be as high as possible since the reliability of brakes is a fundamental factor affecting the safety of the object in motion. The influence of temperature on the materials was also analyzed, and materials were selected for brake disc components. This article is a research and review study. The article describes studies performed on a flat single disc brake. The authors presented the abrasive wear rate for the tested composites (AlSi12/carbon and AlSi12/aluminosilicates) before and after heat treatment (solution heat treatment at 520 degrees C/4 h and aging at 220 degrees C/4 h). Abrasive wear resistance tests were carried out using a TRN S/N 18-324 device from CSM Instruments, combined with the TriboX v.2.96 system according to the description from the US in the ASTM G 99-90 standard.

引用

页码：60 / 66

页数：7

共 44 条

[11] Gawdzinska K, 2017, ARCH FOUNDRY ENG, V17, P47, DOI 10.1515/afe-2017-0129
[12] INFLUENCE OF HEAT TREATMENT ON ABRASIVE WEAR RESISTANCE OF SILUMIN MATRIX COMPOSITE CASTINGS
Gawdzinska, K.
Bryll, K.
Nagolska, D.
[J]. ARCHIVES OF METALLURGY AND MATERIALS, 2016, 61 (01) : 177 - 181
[13] Gazda A., 2009, PRACE INSTYTUTU ODLE, V2, P5
[14] Krawczyk J., 2010, ARCH FOUNDRY ENG, V10, P45
[15] Krawczyk J., 2009, METALL FOUNDRY ENG, V35, P101, DOI DOI 10.7494/MAFE.2009.35.2.101
[16] Evaluation of the Thermal Stability and Surface Characteristics of Thermoplastic Polyurethane V-Belt
Krawiec, Piotr
Rozanski, Leszek
Czarnecka-Komorowska, Dorota
Wargula, Lukasz
[J]. MATERIALS, 2020, 13 (07)
[17] Effect of particle size on mechanical properties and tribological behaviour of aluminium/fly ash composites
Kumar, Krishnan Ravi
Mohanasundaram, Kothavady Mylsamy
Arumaikkannu, Ganesan
Subramanian, Ramanathan
[J]. SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2012, 19 (03) : 247 - 253
[18] Madej W., 2009, ODLEWNICTWO WSPOLCZE, V4, P3
[19] Thermal behavior of a phenolic resin for brake pad manufacturing
Menapace, C.
Leonardi, M.
Secchi, M.
Bonfanti, A.
Gialanella, S.
Straffelini, G.
[J]. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2019, 137 (03) : 759 - 766
[20] Modelling surface thermal damage to hot mill rolls
Mercado-Solis, R. D.
Talamantes-Silva, J.
Beynon, J. H.
Hernandez-Rodriguez, M. A. L.
[J]. WEAR, 2007, 263 (7-12 SPEC. ISS.) : 1560 - 1567

← 1 2 3 4 5 →