A REVIEW OF COMPOSITE MATERIALS USED IN BRAKE DISC PAD MANUFACTURING PROCESS

被引：0

作者：

Szymanski, Pawel ^{[1
]}

Czarnecka-Komorowska, Dorota ^{[1
]}

Gawdzinska, Katarzyna ^{[2
]}

Trubas, Aleksandra ^{[3
]}

Kostecka, Ewelina ^{[2
]}

机构：

[1] Poznan Univ Tech, Fac Mech Engn, Inst Mat Technol, Pl M Sklodowska Curie 5, PL-60965 Poznan, Poland

[2] Maritime Univ Szczecin, Dept Machines Construct & Mat, Ul Willowa 2-4, PL-71650 Szczecin, Poland

[3] AGH Univ Sci & Technol, Fac Nonferrous Met, Al A Mickiewicza 30, PL-30059 Krakow, Poland

来源：

COMPOSITES THEORY AND PRACTICE | 2020年 / 20卷 / 02期

关键词：

brake discs; working conditions; material selection; metal-polymer composites; DRY SLIDING WEAR; CAST-IRON; BEHAVIOR; LAYER;

D O I：

暂无

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

This article presents the conditions and factors influencing the performance and requirements of brake disc materials. The wear resistance of brake discs must be as high as possible since the reliability of brakes is a fundamental factor affecting the safety of the object in motion. The influence of temperature on the materials was also analyzed, and materials were selected for brake disc components. This article is a research and review study. The article describes studies performed on a flat single disc brake. The authors presented the abrasive wear rate for the tested composites (AlSi12/carbon and AlSi12/aluminosilicates) before and after heat treatment (solution heat treatment at 520 degrees C/4 h and aging at 220 degrees C/4 h). Abrasive wear resistance tests were carried out using a TRN S/N 18-324 device from CSM Instruments, combined with the TriboX v.2.96 system according to the description from the US in the ASTM G 99-90 standard.

引用

页码：60 / 66

页数：7

共 44 条

[1] Effect of laser modification of B-Ni complex layer on wear resistance and microhardness
Bartkowska, Aneta
Pertek, Aleksanclra
Poplawski, Mikolaj
Bartkowski, Dariusz
Przestacki, Damian
Miklaszewski, Andrzej
[J]. OPTICS AND LASER TECHNOLOGY, 2015, 72 : 116 - 124
[2] Dry sliding wear behavior of Al 2219/SiCp-Gr hybrid metal matrix composites
Basavarajappa, S.
Chandramohan, G.
Mukund, K.
Ashwin, M.
Prabu, M.
[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2006, 15 (06) : 668 - 674
[3] A novel thermal degradation mechanism of phenol-formaldehyde type resins
Chen Yangfei
Chen Zhiqin
Xiao Shaoyi
Liu Hongbo
[J]. THERMOCHIMICA ACTA, 2008, 476 (1-2) : 39 - 43
[4] Tempering temperature effects on abrasive wear of mottled cast iron
Coronado, J. J.
Gomez, A.
Sinatora, A.
[J]. WEAR, 2009, 267 (11) : 2070 - 2076
[5] Composites materials for friction and braking application
Craciun, A. L.
Pinca-Bretotean, C.
Birtok-Baneasa, C.
Josan, A.
[J]. INNOVATIVE IDEAS IN SCIENCE 2016, 2017, 200
[6] CZARNECKAKOMOROWSK, 2020, MATERIALS, DOI DOI 10.3390/MA13102255
[7] Deshmanya, 2012, J ENG SCI TECHNOLOGY, V5, P44, DOI 10.25103/jestr.051.09
[8] Wear properties of Saffil/Al, Saffil/Al2O3/Al and Saffil/SiC/Al hybrid metal matrix composites
Fu, HH
Han, KS
Song, JI
[J]. WEAR, 2004, 256 (7-8) : 705 - 713
[9] A Study of Metal-Ceramic Composite Foams Combustibility
Gawdzinska, K.
Chybowski, L.
Nabialek, M.
Szymanski, P.
[J]. ACTA PHYSICA POLONICA A, 2019, 135 (02) : 304 - 307
[10] Determination of Duration and Sequence of Vacuum Pressure Saturation in Infiltrated MMC Castings
Gawdzinska, K.
Nagolska, D.
Szymanski, P.
[J]. ARCHIVES OF FOUNDRY ENGINEERING, 2018, 18 (01) : 23 - 28

← 1 2 3 4 5 →