Mechanical Properties of Metal Matrix Nanocomposites Synthesized by Selective Laser Melting Measured by Depth Sensing Indentation Technique

被引：2

作者：

Biedunkiewicz, Anna ^{[1
]}

Figiel, Pawel ^{[1
]}

Biedunkiewicz, Witold ^{[1
]}

Grzesiak, Dariusz ^{[1
]}

Krawczyk, Marta ^{[1
]}

Gabriel-Polrolniczak, Urszula ^{[2
]}

机构：

[1] West Pomeranian Univ Technol, Piastow Ave 17, PL-70310 Szczecin, Poland

[2] Martime Univ Szczecin, PL-70500 Szczecin, Poland

来源：

LOCAL MECHANICAL PROPERTIES IX | 2014年 / 586卷

关键词：

nanoindentation; SLS/M; nanocomposites; MMC;

D O I：

10.4028/www.scientific.net/KEM.586.83

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work presents an investigation on basic mechanical properties (hardness, Young modulus) of metal matrix composites (MMC) reinforced with non-oxide ceramic nanoparticles by means of nanoindentation measurements. The evaluated materials were manufactured by selective laser sintering and/or melting (SLS/M). As a matrix 316L stainless steel and as a reinforcing phase TiC nanoparticles were used. The influence of nanoscale reinforcement on the mechanical properties of MIVIC manufactured with SLS/M process was examined. In this case statistical evaluation of hardness and Young modulus based on nanoindentation data was performed.

引用

页码：83 / +

页数：2

共 8 条

[1] Mechanical properties of phases in Al-Al4C3 mechanically alloyed material measured by depth sensing indentation technique [J].

Besterci, M ;

Pesek, L ;

Zubko, P ;

Hvizdos, P .

MATERIALS LETTERS, 2005, 59 (16) :1971-1975

[2]

Biedunkiewicz A, 2010, J THERM ANAL CALORIM, V101, P701, DOI 10.1007/s10973-010-0919-1

[3]

Biedunkiewicz A, 2011, CHEM LISTY, V105, pS773

[4] SOLIDIFICATION PROCESSING AND TRIBOLOGICAL BEHAVIOR OF PARTICULATE TIC-FERROUS MATRIX COMPOSITES [J].

KATTAMIS, TZ ;

SUGANUMA, T .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1990, 128 (02) :241-252

[5]

Nemecek J, 2011, CHEM LISTY, V105, pS656

[6]

Niihara K., 1991, J. Ceram. Soc. Jpn., V99, P974, DOI [10.2109/jcersj.99.974, DOI 10.2109/JCERSJ.99.974]

[7] AN IMPROVED TECHNIQUE FOR DETERMINING HARDNESS AND ELASTIC-MODULUS USING LOAD AND DISPLACEMENT SENSING INDENTATION EXPERIMENTS [J].

OLIVER, WC ;

PHARR, GM .

JOURNAL OF MATERIALS RESEARCH, 1992, 7 (06) :1564-1583

[8] Review on TiC reinforced steel composites [J].

Parashivamurthy, KI ;

Kumar, RK ;

Seetharamu, S ;

Chandrasekharaiah, MN .

JOURNAL OF MATERIALS SCIENCE, 2001, 36 (18) :4519-4530

← 1 →