Effects of carbon nanotubes on the crystallization behavior of polypropylene

The effect of the incorporation of single-walled carbon nanotubes (SWNTs) on the PP crystallization kinetics is investigated by thermal analysis, microscopy and Raman spectroscopy. The results of the investigation show that SWNT acts as a strong nucleation agent. A marked decrease of the half-time of PP crystallization as well as a sensible increase of the overall crystallization rate is observed in the presence of SWNTs. Moreover, these effects are already noticeable at the lowest SWNT content in the composite with slow further effects at higher concentrations, suggesting a saturation of the nucleating action at the higher concentrations studied. The Avrami model can represent the crystallization kinetics of PP in the composite. The kinetic curves obtained under non-isothermal conditions confirm the results obtained in isothermal tests and demonstrate the nucleation ability of SWNTs on the PP crystallization. Raman spectroscopy and scanning electron microscopy (SEM) are successfully applied to demonstrate that in the composite films, the changes in the crystallization kinetics can be explained in terms of the changes of the distance between nanotubes in bundles following a different intercalation of the polymer matrix.