The effect of ultrasound upon the oxidation of thiosulphate on stainless steel and platinum electrodes

Ultrasound was found to increase the oxidation peak current and hence the decomposition rate of thiosulphate 50-fold compared to silent conditions. The effects of the ultrasonic frequency (20 and 38 kHz) and power upon the electrochemical oxidation of thiosulphate in aqueous KCl (1 mol dm(-3)) at stationary stainless steel and platinum electrodes were studied chronoamperometrically and potentiostatically (at various scan rates). No sigmoidal-shaped voltammograms were observed for the redox couple S4O62-/S2O32- in the presence of ultrasound. However, application of ultrasound to this redox couple provided an increase in the oxidation peak current at the frequencies employed, the magnitude of which varied with concentration, scan rate and ultrasonic power. Under sonication at 20 and 38 kHz, the oxidation peak potential shifted anodically with increasing ultrasonic power. This anodic shift in potential may be due to the formation of hydroxyl radicals, changes in electrode surface composition and complex adsorption phenomena. The large increase in oxidation peak currents and the rates of decomposition of thiosulphate, in the presence of ultrasound, are explained in terms of enhanced mass transfer at the electrode due to cavitation and acoustic streaming together with microstreaming coupled with adsorption phenomena. It is also shown that changes in macroscopic temperature throughout the experiment are insufficient to cause the observed enhanced diffusion. (C) 2002 Elsevier Science B.V. All rights reserved.