Predictive Modelling of Colour Strength and Ink Penetration (%) of Inkjet-Printed Cotton

被引:12
作者
Faisal, Saira [1 ]
Tronci, Aurelio [2 ]
机构
[1] NED Univ Engn & Technol, Text Engn Dept, Karachi 75270, Pakistan
[2] Univ Cagliari, Dept Mech Chem & Mat Engn, I-09124 Cagliari, Italy
关键词
Inkjet printing; Pretreatment; Colour strength; Ink penetration (%); Predictive modelling; P-VALUES; PRETREATMENT; QUALITY; VISCOSE; YIELD;
D O I
10.1007/s12221-018-8196-x
中图分类号
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号
0805 ; 080502 ; 0821 ;
摘要
Recent times have seen a rising interest in inkjet printing of textiles due to potential benefits it offers over conventional printing methods such as lean set-up costs and enabling cost effective short runs. The growing interest has made pretreatment of fabric to be the subject of much recent research. The aim of the study was to develop a model which can predict the colour strength and ink penetration (%) of inkjet-printed cotton as a function of pre- and post- treatment process variables. The independent variables investigated were concentration of thickener, urea, and alkali and steaming time. The experimental plan was based on the full factorial design. Predictive models were constructed by modelling the values of the independent variables and their coefficient of regression. It can be concluded that most significant predictor affecting the colour strength was concentration of urea followed by concentration of thickener; whereas, for ink penetration (%), the most influential predictor was concentration of thickener followed by concentration of urea and steaming time. The adequacy of predictive models was evaluated by analysis of variance, coefficient of determination (R-2) and residual analysis and found to be accurate at 95 % confidence level.
引用
收藏
页码:1435 / 1443
页数:9
相关论文
共 35 条
[21]   Ultrasensitive inkjet-printed based SERS sensor combining a high-performance gold nanosphere ink and hydrophobic paper [J].
Godoy, N., V ;
Garcia-Lojo, D. ;
Sigoli, F. A. ;
Perez-Juste, J. ;
Pastoriza-Santos, I ;
Mazali, I. O. .
SENSORS AND ACTUATORS B-CHEMICAL, 2020, 320
[22]   Inkjet-printed thin film radio-frequency capacitors based on sol-gel derived alumina dielectric ink [J].
McKerricher, Garret ;
Maller, Robert ;
Mohammad, Vaseem ;
McLachlan, Martyn A. ;
Shamim, Atif .
CERAMICS INTERNATIONAL, 2017, 43 (13) :9846-9853
[23]   Impact of ink synthesis on processing of inkjet-printed silicon nanoparticle thin films: A comparison of Rapid Thermal Annealing and photonic sintering [J].
Drahi, E. ;
Blayac, S. ;
Borbely, A. ;
Benaben, P. .
THIN SOLID FILMS, 2015, 574 :169-176
[24]   Compact modelling and SPICE simulation for three-dimensional, inkjet-printed organic transistors, inverters and ring oscillators [J].
Jung, Sungyeop ;
Kwon, Jimin ;
Tokito, Shizuo ;
Horowitz, Gilles ;
Bonnassieux, Yvan ;
Jung, Sungjune .
JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2019, 52 (44)
[25]   The effect of the pretreatment print paste contents on colour yield of an ink-jet printed cotton fabric [J].
C. W. M. Yuen ;
S. K. A. Ku ;
P. S. Choi ;
C. W. Kan .
Fibers and Polymers, 2004, 5 :117-121
[26]   The effect of the pretreatment print paste contents on colour yield of an ink-jet printed cotton fabric [J].
Yuen, CWM ;
Ku, SKA ;
Choi, PS ;
Kan, CW .
FIBERS AND POLYMERS, 2004, 5 (02) :117-121
[27]   Ink formulation of in-situ crosslinkable hole-transporting composite for multilayer inkjet-printed organic light-emitting diodes [J].
Xie, Juxuan ;
Piao, Junxian ;
Liu, Lihui ;
Chen, Dingfu ;
Liu, Yadong ;
Wang, Wei ;
Cao, Kun ;
Shen, Wei ;
Chen, Shufen .
ORGANIC ELECTRONICS, 2021, 99
[28]   A study on the flash-light sintering characteristics with respect to the pattern width and interval of the inkjet-printed copper nano ink on the paper substrate [J].
Choi, Sungjun ;
Jang, Yong-Rae ;
Kim, Hak-Sung ;
Lee, Caroline Sunyong .
2023 7TH IEEE ELECTRON DEVICES TECHNOLOGY & MANUFACTURING CONFERENCE, EDTM, 2023,
[29]   A Universal Ternary-Solvent-Ink Strategy toward Efficient Inkjet-Printed Perovskite Quantum Dot Light-Emitting Diodes [J].
Wei, Changting ;
Su, Wenming ;
Li, Jiantong ;
Xu, Bo ;
Shan, Qingsong ;
Wu, Ye ;
Zhang, Fengjuan ;
Luo, Manman ;
Xiang, Hengyang ;
Cui, Zheng ;
Zeng, Haibo .
ADVANCED MATERIALS, 2022, 34 (10)
[30]   Fully inkjet-printed BaTiO3 capacitive humidity sensor: Microstructural engineering of the humidity sensing layer using bimodal ink [J].
Fernandez, Frances Danielle M. ;
Bissannagari, Murali ;
Kim, Jihoon .
CERAMICS INTERNATIONAL, 2021, 47 (17) :24693-24698