Bi-directional seismic behavior of steel beam-column connections with outer annular stiffener

被引：52

作者：

Bai, Yongtao ^{[1
]}

Wang, Shuhong ^{[1
]}

Mou, Ben ^{[2
]}

Wang, Yan ^{[2
]}

Skalomenos, Konstantinos A. ^{[3
]}

机构：

[1] Chongqing Univ, Sch Civil Engn, Chongqing 400044, Peoples R China

[2] Qingdao Univ Technol, Sch Civil Engn, Qingdao 266033, Peoples R China

[3] Univ Birmingham, Dept Civil Engn, Sch Engn, Birmingham B15 2TT, W Midlands, England

来源：

ENGINEERING STRUCTURES | 2021年 / 227卷 / 227期

关键词：

Steel beam-to-column connection; Bi-directional loading; Beam depth; Fillet weld size; Outer annular stiffener; Seismic design; INTERNAL-DIAPHRAGM CONNECTIONS; THROUGH-DIAPHRAGM; SHEAR BEHAVIOR; EARTHQUAKE; JOINTS; BUILDINGS; FRACTURE; LESSONS;

D O I：

10.1016/j.engstruct.2020.111443

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This paper investigates the seismic behavior of steel beam-column connections with outer annular stiffener under bi-directional cyclic loadings. Five welded three-dimensional beam-column connections configurated by hollow square structural steel (HSS) column sections, H-shaped steel beams, and outer annular stiffener was tested. The main parameters considered in this experimental study include loading protocols (anti-symmetric bidirectional and unidirectional cyclic reversals), beam depths, and the leg size of fillet weld between the outer annular stiffener and column. Moment versus rotation hysteretic responses, skeleton curves, stiffness degradation, and the associated energy-dissipating capacity were analyzed. The hysteretic loops of all specimens show a stable and ductile performance indicating a good energy-dissipating capacity. The ultimate flexural strength under the unidirectional cyclic reversals was found to be 20% higher than that under the corresponding bi-directional loading history. As the fillet weld leg size increases from 6 mm to 10.2 mm, the ultimate flexural capacity of the beam ends is slightly enhanced. The beam depth is a major factor that controls the elastic stiffness and strength capacity of the outer annular stiffener. The ductile failure mode can be achieved by using the proposed equations for the strength calculation of ring stiffeners.

引用

页数：16

共 46 条

[21] Deterioration Modeling of Steel Components in Support of Collapse Prediction of Steel Moment Frames under Earthquake Loading [J].

Lignos, Dimitrios G. ;

Krawinkler, Helmut .

JOURNAL OF STRUCTURAL ENGINEERING, 2011, 137 (11) :1291-1302

[22] Lessons from damage to steel buildings during the Northridge earthquake [J].

Mahin, SA .

ENGINEERING STRUCTURES, 1998, 20 (4-6) :261-270

[23] Lessons learned from the Northridge earthquake [J].

Miller, DK .

ENGINEERING STRUCTURES, 1998, 20 (4-6) :249-260

[24] Post-local buckling failure of slender and over-design circular CFT columns with high-strength materials [J].

Mou, Ben ;

Bai, Yongtao ;

Patel, Vipul .

ENGINEERING STRUCTURES, 2020, 210

[25] Finite element simulations of unequal-depth panel zones in steel beam-to-tubular column joints [J].

Mou, Ben ;

Li, Xi ;

Bai, Yongtao ;

Liu, Wenfeng ;

Jing, Houkai .

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2019, 162

[26] Flexural behavior of beam to column joints with or without an overlying concrete slab [J].

Mou, Ben ;

Zhao, Fei ;

Qiao, Qiyun ;

Wang, Lingling ;

Li, Haitao ;

He, Baojie ;

Hao, Zhiyu .

ENGINEERING STRUCTURES, 2019, 199

[27] Shear Behavior of Panel Zones in Steel Beam-to-Column Connections with Unequal Depth of Outer Annular Stiffener [J].

Mou, Ben ;

Li, Xi ;

Bai, Yongtao ;

Wang, Lisa .

JOURNAL OF STRUCTURAL ENGINEERING, 2019, 145 (02)

[28] Experimental investigation of unequal-depth-beam-to-column joints with t-shape connector [J].

Mou, Ben ;

Pang, Liyi ;

Qiao, Qiyun ;

Yang, Yiting .

ENGINEERING STRUCTURES, 2018, 174 :663-674

[29] Numerical evaluation on shear behavior of irregular steel beam-to-CFST column connections [J].

Mou, Ben ;

Li, Xi ;

Bai, Yongtao ;

He, Baojie ;

Patel, V. I. .

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2018, 148 :422-435

[30] Experimental investigation on shear behavior of steel beam-to-CFST column connections with irregular panel zone [J].

Mou, Ben ;

Bai, Yongtao .

ENGINEERING STRUCTURES, 2018, 168 :487-504

← 1 2 3 4 5 →