Strength and Permeability of a Porous Material Based on Submicron Titanium Carbide Powder

被引：1
|
作者：
Shustov, V. S. [1 ]
Zelensky, V. A. [1 ]
Ankudinov, A. B. [1 ]
Ustyukhin, A. S. [1 ]
机构：
[1] Russian Acad Sci, Baikov Inst Met & Mat Sci, Moscow 119334, Russia
来源：
INORGANIC MATERIALS | 2022年 / 58卷 / 10期
基金：
俄罗斯科学基金会;
关键词：
titanium carbide; sintering; powders; pore former; porosity; permeability; ultimate strength; INFILTRATION; CERAMICS;
D O I：
10.1134/S0020168522100120
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A highly porous material based on submicron titanium carbide powder has been prepared using a pore former. General mechanisms underlying the formation of the pore structure of the material have been identified as functions of the volume fraction of the pore former and sintering temperature, varied in the ranges 75-85% and 1200-1500 degrees C, respectively. Increasing the porosity of the material has been shown to raise its permeability and reduce its strength. At a given porosity, raising the sintering temperature from 1200 to 1500 degrees C allows a material with higher permeability to be obtained, which is accompanied by an increase in its strength.
引用
收藏
页码：1011 / 1016
页数：6
相关论文
共 50 条
  • [1] Strength and Permeability of a Porous Material Based on Submicron Titanium Carbide Powder
    V. S. Shustov
    V. A. Zelensky
    A. B. Ankudinov
    A. S. Ustyukhin
    Inorganic Materials, 2022, 58 : 1011 - 1016
  • [2] Structure and permeability of porous material from titanium carbide produced with porogens of various dispersion
    Shustov, V. S.
    Zelensky, V. A.
    Ankudinov, A. B.
    Ustyukhin, A. S.
    Alymov, M. I.
    LETTERS ON MATERIALS, 2024, 14 (02): : 125 - 129
  • [3] Structure and Strength of Porous Materials Based on Titanium Carbide Powers of Different Dispersion
    Shustov, V. S.
    Zelensky, V. A.
    Ankudinov, A. B.
    Ustyukhin, A. S.
    Kaplan, M. A.
    Ashmarin, A. A.
    INORGANIC MATERIALS-APPLIED RESEARCH, 2024, 15 (05) : 1336 - 1341
  • [4] Synthesis of a porous tube based on powdered titanium carbide
    Alymov M.I.
    Shustov V.S.
    Ankudinov A.B.
    Zelenskii V.A.
    Inorganic Materials: Applied Research, 2011, 2 (5) : 94 - 96
  • [5] Pressureless sintering of submicron titanium carbide powders
    Fu, Zhezhen
    Koc, Rasit
    CERAMICS INTERNATIONAL, 2017, 43 (18) : 17233 - 17237
  • [6] Permeability of Short Fiber Reinforced Powder Metallurgy Material and its Application in Porous Mold
    Bibo Yao
    Zhaoyao Zhou
    Liuyang Duan
    Zhiyu Xiao
    Powder Metallurgy and Metal Ceramics, 2018, 56 : 670 - 680
  • [7] Permeability of Short Fiber Reinforced Powder Metallurgy Material and its Application in Porous Mold
    Yao, Bibo
    Zhou, Zhaoyao
    Duan, Liuyang
    Xiao, Zhiyu
    POWDER METALLURGY AND METAL CERAMICS, 2018, 56 (11-12) : 670 - 680
  • [8] Influence of submicron SiC particle addition on porosity and flexural strength of porous self-bonded silicon carbide
    Kumar, B. V. Manoj
    Lim, Kwang-Young
    Kim, Young-Wook
    METALS AND MATERIALS INTERNATIONAL, 2011, 17 (03) : 435 - 440
  • [9] Effect of submicron silicon carbide powder addition on the processing and strength of reaction-sintered mullite-silicon carbide composites
    Eom, Jung-Hye
    Kim, Young-Wook
    Woo, Sang-Kuk
    Han, In-Sub
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2009, 117 (1364) : 421 - 425
  • [10] Fabrication of porous titanium carbide ceramics by gelcasting process
    Foratirad, H.
    Maragheh, M. G.
    Baharvandi, H. R.
    RARE METALS, 2022, 41 (09) : 3220 - 3227
12345