Influence of surface topography on friction characteristics

被引：57
|
作者：
Nyman, Par
Maki, Rikard [1 ]
Olsson, Richard
Ganemi, Bager
机构：
[1] Lulea Univ Technol, Div Machine Elements, SE-97187 Lulea, Sweden
[2] Haldex Tract Syst AB, SE-26124 Landskrona, Sweden
[3] Statoil Lubricants R&D, SE-14922 Nynashamn, Sweden
来源：
WEAR | 2006年 / 261卷 / 01期
关键词：
wear; topography; wet clutch; stick-slip; sintered friction materials;
D O I：
10.1016/j.wear.2005.09.020
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In heavily loaded wet clutches, such as in limited slip differentials, sintered friction materials are sometimes used due to their resilience at high loads and high temperatures as well as their competitive cost in comparison to alternative friction materials. During the lifetime of the clutch, changes in the friction materials' topography occur. These changes will influence the friction characteristics of the clutch, and therefore affect the anti-shudder performance of the transmission system. This paper investigates the influence of, and classifies, changes in the topography of the sintered friction material. The topography is measured by utilizing vertical scanning interferometry. Different parameters are investigated in order to find relevant parameters correlating to the wear of the material. Results show that changes in the topography of the friction material do indeed influence the friction characteristics of the clutch and that it is possible to calculate relevant topography parameters that describe the amount of wear the material has been subjected to. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码：46 / 52
页数：7
相关论文
共 50 条
  • [1] MODELING OF SURFACE TOPOGRAPHY FOR REDUCED FRICTION
    Sedlacek, Marko
    Podgornik, Bojan
    Vizintin, Joze
    PROCEEDINGS OF THE 9TH BIENNIAL CONFERENCE ON ENGINEERING SYSTEMS DESIGN AND ANALYSIS - 2008, VOL 3, 2009, : 485 - 490
  • [2] Surface Topography Modelling for Reduced Friction
    Sedlacek, Marko
    Vilhena, Luis Miguel Silva
    Podgornik, Bojan
    Vizintin, Joze
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2011, 57 (09): : 674 - 680
  • [3] Dynamic interaction of friction and surface topography in brake systems
    Ostermeyer, GP
    Müller, M
    TRIBOLOGY INTERNATIONAL, 2006, 39 (05) : 370 - 380
  • [4] INFLUENCE OF SURFACE TEXTURE PARAMETERS ON FRICTION CHARACTERISTICS UNDER STARVED LUBRICATION
    Wu, Shen
    Zhang, Pan
    Wei, Haijun
    Chen, Lei
    POLISH MARITIME RESEARCH, 2020, 27 (02) : 96 - 106
  • [5] Influence of surface topography of arc-deposited TiN and sputter-deposited WC/C coatings on the initial material transfer tendency and friction characteristics under dry sliding contact conditions
    Harlin, Peter
    Bexell, Ulf
    Olsson, Mikael
    SURFACE & COATINGS TECHNOLOGY, 2009, 203 (13): : 1748 - 1755
  • [6] In situ measurement of roll surface 3-D topography in sliding friction (Part 2) - Effect of roll surface topography in sliding friction and wear
    Ando, K
    Kato, K
    JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 1999, 44 (11) : 890 - 897
  • [7] Influence of surface preparation on surface topography and tribological behaviours
    Dzierwa, Andrzej
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2017, 17 (03) : 502 - 510
  • [8] The effect of density and surface topography on the coefficient of friction of polytetrafluoroethylene films
    Brownell, Mathew
    Nair, Arun K.
    MRS ADVANCES, 2020, 5 (54-55) : 2753 - 2762
  • [9] On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation
    Olofsson, J.
    Gerth, J.
    Nyberg, H.
    Wiklund, U.
    Jacobson, S.
    WEAR, 2011, 271 (9-10) : 2046 - 2057
  • [10] Influence of the Surface Layer Morphology of SiSiC Ceramics on the Tribological Characteristics of a Hybrid Friction Couple
    V. V. Kuzin
    S. N. Grigoriev
    S. Yu. Fedorov
    Refractories and Industrial Ceramics, 2022, 63 : 297 - 301
12345