Enhanced Multipactor Performance in 3D Printed Microwave Parts

被引：0
|
作者：
Martin-Iglesias, Petronilo [1 ,2 ]
Montero, Isabel [3 ]
Teberio, Fernando [2 ]
Arregui, Ivan [2 ]
Percaz, Jon M. [2 ]
Lopetegi, Txema [2 ]
Arnedo, Israel [2 ]
Olano, Leandro [3 ]
Laso, Miguel A. G. [2 ]
机构：
[1] ESTEC, ESA, Noordwijk, Netherlands
[2] Univ Publ Navarra, Elect & Elect Engn Dept, Pamplona, Spain
[3] CSIC, Inst Ciencia Mat Madrid, Cient, Madrid, Spain
来源：
2017 IEEE MTT-S INTERNATIONAL MICROWAVE WORKSHOP SERIES ON ADVANCED MATERIALS AND PROCESSES FOR RF AND THZ APPLICATIONS (IMWS-AMP) | 2017年
关键词：
Waveguide filters; Additive Manufacturing; 3D printing; multipactor; SEY; high power;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
An in-depth secondary emission characterization for metal additive manufactured samples has been performed to assess the impact of the surface roughness in this parameter. Three samples has been 3D printed, post-processed with two different treatments and tested. The results shown a secondary emission improvement with considering as-built parts while is getting closer to the flat aluminum surface values when a post-process for improving the surface roughness is applied. The roughness from additively manufactured surfaced could be exploited to reduce the surface secondary emission and, hence, to increase the power for multipactor discharge.
引用
收藏
页数：3
相关论文
共 50 条
  • [41] Sequential additive manufacturing: automatic manipulation of 3D printed parts
    Aroca, Rafael Vidal
    Ventura, Carlos E. H.
    De Mello, Igor
    Pazelli, Tatiana F. P. A. T.
    RAPID PROTOTYPING JOURNAL, 2017, 23 (04) : 653 - 659
  • [42] Mechanical Properties of 3D Printed Parts and Their Injection Molded Alternatives Subjected to Environmental Aging
    Andrzejewska, Angela Jadwiga
    3D PRINTING AND ADDITIVE MANUFACTURING, 2024, 11 (04) : e1581 - e1588
  • [43] 3D Printing under High Ambient Pressures and Improvement of Mechanical Properties of Printed Parts
    Shaik, Yousuf Pasha
    Schuster, Jens
    Katherapalli, Harshavardhan Reddy
    Shaik, Aarif
    JOURNAL OF COMPOSITES SCIENCE, 2022, 6 (01):
  • [44] Investigating mechanical properties of 3D printed parts manufactured in different orientations on multijet printer
    Chand R.
    Sharma V.S.
    Trehan R.
    International Journal of Mechatronics and Manufacturing Systems, 2021, 14 (02) : 164 - 179
  • [45] Material Consuption Reduction and the Influence on the Mechanical Properties of the 3D Printed Parts for ABS Silver
    Bedo, Tibor
    Pop, Mihai Alin
    Geaman, Virgil
    Radomir, Irinel
    Semenescu, Augustin
    Ghiban, Brandusa
    Florea, Bogdan
    MATERIALE PLASTICE, 2021, 58 (03) : 99 - 108
  • [46] Low-Cost Microplate Reader with 3D Printed Parts for under 500 USD
    Thompson, Jonathan E.
    SENSORS, 2022, 22 (09)
  • [47] Thermal performance exploration of 3D printed cob
    Gomaa, Mohamed
    Carfrae, Jim
    Goodhew, Steve
    Jabi, Wassim
    Reyez, Alejandro Veliz
    ARCHITECTURAL SCIENCE REVIEW, 2019, 62 (03) : 230 - 237
  • [48] Bending Performance of Thin 3D Printed Antennas
    Heileman, Grant D.
    Reese, Malcolm S.
    Doyle, Derek
    Christodoulou, Christos G.
    2020 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION AND NORTH AMERICAN RADIO SCIENCE MEETING, 2020, : 1869 - 1870
  • [49] Performance Analysis of Enhanced 3D Printed Polymer Molds for Metal Injection Molding Process
    Altaf, Khurram
    Qayyum, Junaid A.
    Rani, Ahmad Majdi A.
    Ahmad, Faiz
    Megat-Yusoff, Puteri S. M.
    Baharom, Masri
    Aziz, Abdul Rashid A.
    Jahanzaib, Mirza
    German, Randall M.
    METALS, 2018, 8 (06)
  • [50] 3D Printed Underwater Housing
    Champion, Benjamin T.
    Jamshidi, Mo
    Joordens, Matthew A.
    2016 WORLD AUTOMATION CONGRESS (WAC), 2016,
12345