Enhanced Multipactor Performance in 3D Printed Microwave Parts

被引：0
|
作者：
Martin-Iglesias, Petronilo [1 ,2 ]
Montero, Isabel [3 ]
Teberio, Fernando [2 ]
Arregui, Ivan [2 ]
Percaz, Jon M. [2 ]
Lopetegi, Txema [2 ]
Arnedo, Israel [2 ]
Olano, Leandro [3 ]
Laso, Miguel A. G. [2 ]
机构：
[1] ESTEC, ESA, Noordwijk, Netherlands
[2] Univ Publ Navarra, Elect & Elect Engn Dept, Pamplona, Spain
[3] CSIC, Inst Ciencia Mat Madrid, Cient, Madrid, Spain
来源：
2017 IEEE MTT-S INTERNATIONAL MICROWAVE WORKSHOP SERIES ON ADVANCED MATERIALS AND PROCESSES FOR RF AND THZ APPLICATIONS (IMWS-AMP) | 2017年
关键词：
Waveguide filters; Additive Manufacturing; 3D printing; multipactor; SEY; high power;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
An in-depth secondary emission characterization for metal additive manufactured samples has been performed to assess the impact of the surface roughness in this parameter. Three samples has been 3D printed, post-processed with two different treatments and tested. The results shown a secondary emission improvement with considering as-built parts while is getting closer to the flat aluminum surface values when a post-process for improving the surface roughness is applied. The roughness from additively manufactured surfaced could be exploited to reduce the surface secondary emission and, hence, to increase the power for multipactor discharge.
引用
收藏
页数：3
相关论文
共 50 条
  • [1] QUALITY CONTROL STUDY ON 3D PRINTED PARTS
    Jackson, Brandon
    Fouladi, Kamran
    Eslami, Babak
    PROCEEDINGS OF ASME 2022 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2022, VOL 2A, 2022,
  • [2] Study of Forming Performance and Characterization of DLP 3D Printed Parts
    Jiang, Ting
    Yan, Bo
    Jiang, Minzheng
    Xu, Buguang
    Gao, Sheng
    Xu, Yi
    Yu, Yueqiang
    Ma, Tingang
    Qin, Tao
    MATERIALS, 2023, 16 (10)
  • [3] 3D Printed Microwave Components for Frequencies above 100 GHz
    Skaik, Talal
    Yu, Yang
    Wang, Yi
    Huggard, Peter G.
    Hunyor, Peter
    Wang, Hui
    2021 IEEE MTT-S INTERNATIONAL MICROWAVE FILTER WORKSHOP (IMFW), 2021, : 246 - 248
  • [4] Selective electroplating of 3D printed parts
    Angel, Kristin
    Tsang, Harvey H.
    Bedair, Sarah S.
    Smith, Gabriel L.
    Lazarus, Nathan
    ADDITIVE MANUFACTURING, 2018, 20 : 164 - 172
  • [5] Surface Anisotropy on 3D Printed Parts
    Ficzere, Peter
    PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING, 2024, 68 (03): : 272 - 277
  • [6] 3D Printed Embedded Strain Sensor with Enhanced Performance
    Nassar, Habib
    Dahiya, Ravinder
    2022 IEEE INTERNATIONAL CONFERENCE ON FLEXIBLE AND PRINTABLE SENSORS AND SYSTEMS (IEEE FLEPS 2022), 2022,
  • [7] Microstructure and mechanical performance examination of 3D printed acrylonitrile butadiene styrene thermoplastic parts
    Gupta, Chhavi
    Pallavi
    Shet, Nitesh Kumar
    Ghosh, Anup K.
    Bandyopadhyay, Sumanda
    Mukhopadhyay, Prasanta
    POLYMER ENGINEERING AND SCIENCE, 2020, 60 (11) : 2770 - 2781
  • [8] Tribological studies of 3D printed ABS and PLA plastic parts
    Roy, Rahul
    Mukhopadhyay, Abhijit
    MATERIALS TODAY-PROCEEDINGS, 2021, 41 : 856 - 862
  • [9] Improving Geometric Accuracy of 3D Printed Parts Using 3D Metrology Feedback and Mesh Morphing
    Jadayel, Moustapha
    Khameneifar, Farbod
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2020, 4 (04):
  • [10] Maximizing Mechanical Performance of 3D Printed Parts Through Process Parameter Optimization
    Markovic, Marijan-Pere
    Cingesar, Ivan Karlo
    Vrsaljko, Domagoj
    3D PRINTING AND ADDITIVE MANUFACTURING, 2024, 11 (06) : E2062 - E2074
12345