The grain refinement of 1070 alloy by different Al-Ti-B mater alloys and its influence on the electrical conductivity

被引：20

作者：

Xu, Xuexia ^{[1
,2
]}

Feng, Yanting ^{[1
,2
]}

Fan, Hui ^{[3
]}

Wang, Qing ^{[1
,2
]}

Dong, Guozhen ^{[1
,2
]}

Li, Guowei ^{[1
,2
]}

Zhang, Zihan ^{[4
]}

Liu, Qing ^{[4
]}

Fan, Xiaoliang ^{[4
]}

Ding, Haimin ^{[4
]}

机构：

[1] State Grid Hebei Elect Power Res Inst, Shijiazhuang 050021, Hebei, Peoples R China

[2] State Grid Hebei Energy Technol Serv Co Ltd, Shijiazhuang 050021, Hebei, Peoples R China

[3] State Grid Hebei Elect Power Co Ltd, Shijiazhuang 050022, Hebei, Peoples R China

[4] North China Elect Power Univ, Sch Energy Power & Mech Engn, Baoding 071003, Peoples R China

来源：

RESULTS IN PHYSICS | 2019年 / 14卷

关键词：

Grain refinement; Electrical conductivity; Al; Master alloys; TRANSITION-METAL IMPURITIES; MECHANICAL-PROPERTIES; ALUMINUM-ALLOYS; BORON TREATMENT; IMPROVEMENT;

D O I：

10.1016/j.rinp.2019.102482

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The excellent grain refinement effectiveness and good electrical conductivity is difficult to be simultaneously obtained due to the influence of both the grain boundary and excessive Ti in the usually used refiners, such as Al-5Ti-1B master alloy. In order to solve this problem, in this work, Al-Ti-B mater alloys with less or without excessive Ti but with high refinement potency TiB2 have been tried to prepare, and the grain refinement effectiveness of them and its influence on the electrical conductivity of the refined Al have been investigated. It is found that the grain refinement effectiveness of the Al-Ti-B master alloys prepared using the Al-5Ti-1B and Al-B master alloys as the starting materials at 720 degrees C is much better than those prepared using the Al-10Ti and Al-B master alloys, which is because that the high refinement potency TiB2 with TiAl3 2DC in the Al-5Ti-B can be kept in the prepared master alloys. As a result, using the prepared Al-Ti-B master alloys as the refiners, both the good grain refinement effectiveness and improved electrical conductivity of Al can be realized.

引用

页数：12

共 26 条

[1] Investigation of the effect of Al-5Ti-1B grain refiner on dry sliding wear behavior of an Al-Zn-Mg-Cu alloy formed by strain-induced melt activation process
Alipour, Mohammad
Aghdam, Baharak Ghorbanian
Rahnoma, Hamid Ebrahimi
Emamy, M.
[J]. MATERIALS & DESIGN, 2013, 46 : 766 - 775
[2] Removal of transition metal impurities in aluminium melts by boron additives
Cooper, PS
Kearns, MA
[J]. ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 1996, 217 : 141 - 146
[3] The improvement of boron treatment efficiency and electrical conductivity of AA1070Al achieved by trace Ti assistant
Cui, Xiaoli
Wu, Yuying
Cui, Hongwei
Zhang, Guojun
Zhou, Bo
Liu, Xiangfa
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 735 : 62 - 67
[4] Study on the improvement of electrical conductivity and mechanical properties of loim alloying electrical aluminum alloys
Cui, Xiaoli
Wu, Yuying
Zhang, Guojun
Liu, Yibo
Liu, Xiangfa
[J]. COMPOSITES PART B-ENGINEERING, 2017, 110 : 381 - 387
[5] Effects of grain refinement and boron treatment on electrical conductivity and mechanical properties of AA1070 aluminum
Cui, Xiaoli
Wu, Yuying
Liu, Xiangfa
Zhao, Qingru
Zhang, Guojun
[J]. MATERIALS & DESIGN, 2015, 86 : 397 - 403
[6] A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles
Easton, MA
StJohn, DH
[J]. ACTA MATERIALIA, 2001, 49 (10) : 1867 - 1878
[7] Grain refining mechanism in the Al/Al-Ti-B system
Fan, Z.
Wang, Y.
Zhang, Y.
Qin, T.
Zhou, X. R.
Thompson, G. E.
Pennycook, T.
Hashimoto, T.
[J]. ACTA MATERIALIA, 2015, 84 : 292 - 304
[8] OVERHEAD TRANSMISSION-LINES - REFURBISHMENT AND DEVELOPMENTS
FERGUSON, JM
GIBBON, RR
[J]. POWER ENGINEERING JOURNAL, 1994, 8 (03): : 109 - 118
[9] ALUMINUM .1. REVIEW OF RESISTIVE MECHANISMS IN ALUMINUM
FICKETT, FR
[J]. CRYOGENICS, 1971, 11 (05) : 349 - +
[10] Grain refinement of aluminium alloys by inoculation
Greer, AL
Cooper, PS
Meredith, MW
Schneider, W
Schumacher, P
Spittle, JA
Tronche, A
[J]. ADVANCED ENGINEERING MATERIALS, 2003, 5 (1-2) : 81 - 91

← 1 2 3 →