Design and performance analysis of ORC centrifugal pumps

被引：1

作者：

Klimaszewski, Piotr ^{[1
]}

Klonowicz, Piotr ^{[1
]}

Lampart, Piotr ^{[1
]}

Witanowski, Lukasz ^{[1
]}

Zaniewski, Dawid ^{[1
]}

Jedrzejewski, Lukasz ^{[1
]}

Suchocki, Tomasz ^{[1
]}

机构：

[1] Polish Acad Sci, Inst Fluid Flow Machinery, Fiszera 14, PL-80231 Gdansk, Poland

来源：

ARCHIVES OF THERMODYNAMICS | 2020年 / 41卷 / 04期

关键词：

CFD; ORC power plant; Microturbine and pump; OD meanline design;

D O I：

10.24425/ather.2020.135860

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The purpose of this work is to design and determine the performance of a prototype centrifugal pump impeller for an organic Rankine cycle (ORC) power plant of maximum power 100 kW. The centrifugal pump is especially designed to work on the same shaft as the corresponding ORC rnicroturbine. The ORC unit works on R7100 (HFE71.00) - a low-boiling fluid characterized by a zero ozone depletion potential coefficient. The pump has the following rated parameters: nominal flow rate of working fluid 4 kg/s, operating rotor speed 10 000 rpm. The pump designed by means of the OD meanline method is subject to computational fluid dynamics (CFD) calculations and analysis. The obtained flow field results are discussed and performance characteristics of the pump are presented. The non-cavitating operational region is determined for the pump.

引用

页码：203 / 222

页数：20

共 50 条

[31] Performance analysis of double suction centrifugal pumps with a novel impeller configuration
Capurso, T.
Bergamini, L.
Torresi, M.
ENERGY CONVERSION AND MANAGEMENT-X, 2022, 14
[32] MICROCOMPUTER TECHNIQUE FOR OPTIMUM DESIGN OF CENTRIFUGAL PUMPS
SHAHIN, MMA
MICROPROCESSING AND MICROPROGRAMMING, 1990, 29 (01): : 43 - 51
[33] DESIGN ASPECTS OF CENTRIFUGAL PUMPS FOR ABRASIVE SLURRIES
WILSON, G
CIM BULLETIN, 1973, 66 (733): : 91 - 102
[34] A STUDY IN THE USE OF CFD IN THE DESIGN OF CENTRIFUGAL PUMPS
Yedidiah, S.
ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS, 2008, 2 (03) : 331 - 343
[35] Centrifugal pumps' impellers design and digital fabrication
Cantrak, Dorde S.
Jankovic, Novica Z.
Ilic, Dejan B.
Lecic, Milan R.
PROCEEDINGS OF THE 2016 INTERNATIONAL CONFERENCE MULTIDISCIPLINARY ENGINEERING DESIGN OPTIMIZATION (MEDO), 2016,
[36] Inverse problem design of blade for centrifugal pumps
Li, Wenguang
Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 2000, 31 (03): : 49 - 51
[37] Nonlinear Controller and Observer Design for Centrifugal Pumps
Caba, Sebastian
Lepper, Markus
Liu, Steven
2016 IEEE CONFERENCE ON CONTROL APPLICATIONS (CCA), 2016,
[38] Numerical Research on Performance Prediction for Centrifugal Pumps
TAN Minggao
Chinese Journal of Mechanical Engineering, 2010, 23 (01) : 21 - 26
[39] Numerical Research on Performance Prediction for Centrifugal Pumps
Tan Minggao
Yuan Shouqi
Liu Houlin
Wang Yong
Wang Kai
CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2010, 23 (01) : 21 - 26
[40] Selection criteria for high performance centrifugal pumps
Saxena, S.V.
Kuehlmann, J.
Beck, W.
Chemie-Technik (Heidelberg), 1998, 27 (09): : 88 - 91

← 1 2 3 4 5 →