Design and performance analysis of ORC centrifugal pumps

被引：1

作者：

Klimaszewski, Piotr ^{[1
]}

Klonowicz, Piotr ^{[1
]}

Lampart, Piotr ^{[1
]}

Witanowski, Lukasz ^{[1
]}

Zaniewski, Dawid ^{[1
]}

Jedrzejewski, Lukasz ^{[1
]}

Suchocki, Tomasz ^{[1
]}

机构：

[1] Polish Acad Sci, Inst Fluid Flow Machinery, Fiszera 14, PL-80231 Gdansk, Poland

来源：

ARCHIVES OF THERMODYNAMICS | 2020年 / 41卷 / 04期

关键词：

CFD; ORC power plant; Microturbine and pump; OD meanline design;

D O I：

10.24425/ather.2020.135860

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The purpose of this work is to design and determine the performance of a prototype centrifugal pump impeller for an organic Rankine cycle (ORC) power plant of maximum power 100 kW. The centrifugal pump is especially designed to work on the same shaft as the corresponding ORC rnicroturbine. The ORC unit works on R7100 (HFE71.00) - a low-boiling fluid characterized by a zero ozone depletion potential coefficient. The pump has the following rated parameters: nominal flow rate of working fluid 4 kg/s, operating rotor speed 10 000 rpm. The pump designed by means of the OD meanline method is subject to computational fluid dynamics (CFD) calculations and analysis. The obtained flow field results are discussed and performance characteristics of the pump are presented. The non-cavitating operational region is determined for the pump.

引用

页码：203 / 222

页数：20

共 50 条

[21] Failure analysis of centrifugal pumps
Ardell, BL
SOUND AND VIBRATION, 1997, 31 (09): : 20 - 25
[22] Performance of REDA submerged centrifugal pumps
Drozdov, AN
NEFTYANOE KHOZYAISTVO, 1995, (1-2): : 63 - 65
[23] LOSSES IN VANELESS DIFFUSERS OF CENTRIFUGAL COMPRESSORS AND PUMPS - ANALYSIS EXPERIMENT AND DESIGN
JOHNSTON, JP
DEAN, RC
JOURNAL OF ENGINEERING FOR POWER, 1966, 88 (01): : 49 - &
[24] Design and analysis of an axial thrust balancing device for multistage centrifugal pumps
Ma X.
Wu D.
Wang L.
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2010, 26 (08): : 108 - 112
[25] CFD Analysis on the Balancing Hole Design for Magnetic Drive Centrifugal Pumps
Kim, Won-Sik
Yun, Jeong-Eui
ENERGIES, 2020, 13 (22)
[26] Analysis of the influence of design and operating parameters on pressure pulsations in centrifugal pumps
Timouchev, S
Pavic, G
HOUILLE BLANCHE-REVUE INTERNATIONALE DE L EAU, 1998, 53 (3-4): : 61 - +
[27] Design of a Novel Electric Diagnostic Technique for Fault Analysis of Centrifugal Pumps
Irfan, Muhammad
Alwadie, A.
Glowacz, Adam
APPLIED SCIENCES-BASEL, 2019, 9 (23):
[28] Improvement of performance of centrifugal pumps based on computational and theoretical methods and experimental design
Vinokurov, AF
Volkov, AV
Morgunov, GM
Pankratov, SN
HYDRAULIC MACHINERY AND CAVITATION, VOLS I AND II, 1996, : 438 - 444
[29] Design and performance test of circumferential crankle guide vane of multistage centrifugal pumps
Zhang, Q. (qihua05@163.com), 1600, Chinese Society of Agricultural Engineering (29):
[30] Performance analysis of cavitating flow in centrifugal pumps using multiphase CFD
Medvitz, RB
Kunz, RF
Boger, DA
Lindau, JW
Yocum, AM
Pauley, LL
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2002, 124 (02): : 377 - 383

← 1 2 3 4 5 →