Influence of temperature upon properties of tailor-made PEBAX® MU 1657 nanocomposite membranes for post-combustion CO2 capture

被引：40

作者：

Rahman, Md. Mushfequr ^{[1
]}

Shishatskiy, Sergey ^{[1
]}

Abetz, Clarissa ^{[1
]}

Georgopanos, Prokopios ^{[1
]}

Neumann, Silvio ^{[1
]}

Khan, Muntazim Munir ^{[1
]}

Filiz, Volkan ^{[1
]}

Abetz, Volker ^{[1
,2
]}

机构：

[1] Helmholtz Zentrum Geesthacht, Polymer Res Inst, D-21502 Geesthacht, Germany

[2] Univ Hamburg, Inst Phys Chem, D-20146 Hamburg, Germany

来源：

JOURNAL OF MEMBRANE SCIENCE | 2014年 / 469卷

关键词：

PEBAX (R); POSS; Nanocomposite; Gas separation membrane; Mixed-matrix-membrane; GAS-TRANSPORT PROPERTIES; PEG FUNCTIONALIZED POSS; PERMEATION; BEHAVIOR;

D O I：

10.1016/j.memsci.2014.06.048

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Tailor-made block copolymer nanocomposite membranes are prepared by incorporation of 40 wt% methoxy poly(ethylene glycol) (PEG) functionalized polyoctahedral oligomeric silsesquioxanes (POSS) nanoparticles in commercial thermoplastic elastomer multiblock copolymer PEBAX (R) MH 1657. Atomic force microscopy was used to find out the location of the nanoparticles in the block copolymer matrix. Separation of CO2 from N-2 and H-2 is studied by measurements of single gas transport properties of nanocomposite materials using the time-lag method in the temperature range 30-70 degrees C. PEG functionalized POSS nanoparticles increase the CO2 permeability of the nanocomposite membranes without loss of CO2/N-2 and CO2/H-2 selectivity. Thermal properties of the nanocomposite membranes are studied by differential scanning calorimetry (DSC) to assess the stability of the nanocomposite membranes upon melting of polyether and polyamide blocks. (C) 2014 Elsevier B.V. All rights reserved.

引用

页码：344 / 354

页数：11

共 35 条

[31] Biphasic solvents based on dual-functionalized ionic liquid for enhanced post-combustion CO2 capture and corrosion inhibition during the absorption process
Mao, Jiaming
Li, Chang
Yun, Yanbin
Liu, Jia
Yang, Wenjuan
Li, Meng
Wang, Lihua
Li, Chunli
Li, Wenli
CHEMICAL ENGINEERING JOURNAL, 2024, 481
[32] Dual phase high-temperature membranes for CO2 separation - performance assessment in post- and pre-combustion processes
Anantharaman, Rahul
Peters, Thijs
Xing, Wen
Fontaine, Marie-Laure
Bredesen, Rune
FARADAY DISCUSSIONS, 2016, 192 : 251 - 269
[33] Aspen Plus supported analysis of the post-combustion CO2 capture by chemical absorption using the [P2228] [CNPyr] and [P66614] [CNPyr] AHA Ionic Liquids
de Riva, J.
Ferro, V
Moya, C.
Stadtherr, M. A.
Brennecke, J. F.
Palomar, J.
INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL, 2018, 78 : 94 - 102
[34] Influence of ZIF-8 particle size in the performance of polybenzimidazole mixed matrix membranes for pre-combustion CO2 capture and its validation through interlaboratory test
Sanchez-Lainez, Javier
Zornoza, Beatriz
Friebe, Sebastian
Caro, Juergen
Cao, Shuai
Sabetghadam, Anahid
Seoane, Beatriz
Gascon, Jorge
Kapteijn, Freek
Le Guillouzer, Clement
Clet, Guillaume
Daturi, Marco
Tellez, Carlos
Coronas, Joaquin
JOURNAL OF MEMBRANE SCIENCE, 2016, 515 : 45 - 53
[35] Influence of interface-related parameters on some heat stable salts in the corrosion studies of carbon steel for post-combustion CO2 captureEinfluss von temperaturbestandigen Salzen auf das Korrosionsverhalten von Kohlenstoffstahl fur die Kohlendioxidfilterung in der Nachverbrennung
Emori, W.
Jiang, S. L.
Zheng, Y. G.
Okonkwo, P. C.
Obike, A. I.
Okafor, P. C.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2021, 52 (11) : 1185 - 1200

← 1 2 3 4 →