The effect of titanium on pitting corrosion resistance of welded supermartensitic stainless steel

被引：9

作者：

Rodrigues, C. A. D. ^{[1
]}

Pagotto, J. F. ^{[1
]}

Motheo, A. J. ^{[1
]}

Tremiliosi-Filho, G. ^{[1
]}

机构：

[1] Univ Sao Paulo, Inst Chem Sao Carlos, Av Trabalhador Sancarlense 400, BR-13566590 Sao Carlos, SP, Brazil

来源：

CORROSION ENGINEERING SCIENCE AND TECHNOLOGY | 2017年 / 52卷 / 02期

基金：

巴西圣保罗研究基金会;

关键词：

Supermartensitic stainless steels; pitting corrosion; welding; titanium; microstructural characterisation; MECHANICAL-PROPERTIES; RESIDUAL-STRESS; MICROSTRUCTURE; AUSTENITE;

D O I：

10.1080/1478422X.2016.1223263

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study evaluated the effect of Ti in the supermartensitic stainless steel (SMSS) on the pitting corrosion in welded joints using gas tungsten arc welding. In the welded SMSS sample, there was martensite grain coarsening in the heat-affected zone (HAZ), and d-ferrite formation at the interface between the base metal and HAZ regions. The presence of Ti in the SMSS prevented grain coarsening and promoted the formation of retained austenite in the HAZ regions. The values of the pitting potentials of SMSS + Ti and SSMS using a cell-pen (designed to reveal the behaviour of localised microstructure in a narrow area) were 0.347 and 0.286 V in the non-welded condition, and 0.374 and 0.183 V in the welded condition, respectively. The corresponding values using the conventional cell were 0.349 and 0.257 V in the non-welded condition and 0.230 and 0.089 V in the welded condition, respectively.

引用

页码：141 / 148

页数：8

共 50 条

[1] Intergranular and Pitting Corrosion Susceptibilities of a Supermartensitic Stainless Steel Weldment
Aquino, J. M.
Della Rovere, C. A.
Kuri, S. E.
CORROSION, 2010, 66 (11)
[2] Effect of titanium nitride (TiN) on the corrosion behavior of a supermartensitic stainless steel
Rodrigues, Cesar Augusto D.
Bandeira, Rafael M.
Duarte, Barbara B.
Tremiliosi-Filho, Germano
Roche, Virginie
Jorge, Alberto M., Jr.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2019, 70 (01): : 28 - 36
[3] Localized corrosion susceptibility of supermartensitic stainless steel in welded joints
Aquino, J. M.
Della Rovere, C. A.
Kuri, S. E.
CORROSION, 2008, 64 (01) : 35 - 39
[4] Influence of heat treatments on microstructure and pitting corrosion resistance of 15% Cr supermartensitic stainless steel
Barbosa, B. A. R. S.
Tavares, S. S. M.
Bastos, I. N.
Silva, M. R.
de Macedo, M. C. S.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2014, 49 (04) : 311 - 315
[5] Corrosion behavior of radial friction welded supermartensitic stainless steel pipes
Della Rovere, C. A.
Aquino, J. M.
Ribeiro, C. R.
Silva, R.
Alcantara, N. G.
Kuri, S. E.
MATERIALS & DESIGN, 2015, 65 : 318 - 327
[6] Microstructure and corrosion resistance of radial friction welded supermartensitic stainless steels
Della Rovere, Carlos Alberto
Ribeiro, Celso Roberto
da Silva, Rodrigo
de Alcantara, Nelson Guedes
Kuri, Sebastiao Elias
SOLDAGEM & INSPECAO, 2014, 19 (03): : 255 - 263
[7] Elucidating the effect of titanium alloying on the pitting corrosion of ferritic stainless steel
Liu, Menghao
Liu, Bo
Ni, Zeqing
Du, Cuiwei
Li, Xiaogang
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 28 : 1247 - 1262
[8] Effect of hydrogen on the pitting corrosion of 2205 duplex stainless steel welded joints
Zheng, Qing
Zhang, Houwei
Wang, Dengyun
Xu, Lining
Li, Gang
Qiao, Lijie
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2024, 59 (02) : 104 - 119
[9] Effect of tempering on the corrosion resistance of supermartensitic stainless steels
Ciscato Camillo, Ana Paula
Della Rovere, Carlos Alberto
de Aquino, Jose Mario
Kuri, Sebastiao Elias
REM-REVISTA ESCOLA DE MINAS, 2010, 63 (01) : 117 - 122
[10] Effects of nitrogen element on microstructure and pitting corrosion resistance of duplex stainless steel welded joints
Zhang, Yingying
Liu, Zhengjun
Lin, Meiling
Song, Shuang
MATERIALS RESEARCH EXPRESS, 2021, 8 (02)

← 1 2 3 4 5 →