The optimal detuning approach based centralized control design for MIMO processes

被引:23
作者
Khandelwal, Shubham [1 ]
Detroja, Ketan P. [1 ]
机构
[1] Indian Inst Technol Hyderabad Kandi, Kandi 502285, TS, India
关键词
Multivariable process; Centralized control; ETF parameterization; Optimal detuning parameter; PI controller; CONTROL-SYSTEM DESIGN; MULTIVARIABLE CONTROL-SYSTEMS; INTERNAL-MODEL CONTROL; PI CONTROLLER; DISTURBANCE REJECTION; OPTIMIZATION;
D O I
10.1016/j.jprocont.2020.10.006
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This manuscript introduces an optimal detuning approach for designing a centralized PI control system for multi-input multi-output (MIMO) processes. Based on the approach, two multivariable PI controller designs are proposed in this manuscript. The proposed approach formulates the centralized PI controller design problem in an optimization framework and transforms it into an equivalent detuning parameter(s) design problem. While the centralized controller design with the proposed 1-Optimal Detuning Parameter (ODP) method is carried out as a multi-stage problem, the proposed 2-ODP method formulates the controller design as a single-stage optimization problem. An effective transfer function (ETF) parameterization followed by controller synthesis using the IMC theory and further the optimal detuning comprises the various stages in 1-ODP design. In this regard, a novel ETF parameterization procedure for large scale processes or systems with higher-order elements is presented in this manuscript. Contrary to the centralized controller design in the k(p), k(i) space, where the dimensionality of the optimization problem blows at O(2n(2)), the proposed 1-ODP and 2-ODP design methods always aim at solving a uniand bi-dimensional optimization problem, respectively, irrespective of the dimensionality of the MIMO process. Hence, the proposed method is easily applicable even to high-dimensional MIMO processes. Several illustrative industrial MIMO systems are considered to demonstrate the applicability of the proposed methods to highly interacting and large scale processes. The simulation studies show that the proposed methods performs better as compared to the other centralized PI controller designs. Even with parameter variations, the proposed methods give satisfactory closed-loop performance. Further, robust stability analysis for the proposed designs is performed by considering multiplicative input and output uncertainties. (C) 2020 Elsevier Ltd. All rights reserved.
引用
收藏
页码:23 / 36
页数:14
相关论文
共 57 条
[1]  
[Anonymous], 2001, MULTIOBJECTIVE OPTIM
[2]  
[Anonymous], 2007, MULTIVARIABLE FEEDBA
[3]   Revisiting the Ziegler-Nichols step response method for PID control [J].
Åstrom, KJ ;
Hågglund, T .
JOURNAL OF PROCESS CONTROL, 2004, 14 (06) :635-650
[4]   An experimental comparison of PID autotuners [J].
Berner, Josefin ;
Soltesz, Kristian ;
Hagglund, Tore ;
Astrom, Karl Johan .
CONTROL ENGINEERING PRACTICE, 2018, 73 :124-133
[5]   Tuning of Multivariable PI Controllers by BLT Method for TITO Systems [J].
Besta, Chandra Shekar ;
Chidambaram, Manickam .
CHEMICAL ENGINEERING COMMUNICATIONS, 2016, 203 (04) :527-538
[6]   Design of decentralized PI control systems based on Nyquist stability analysis [J].
Chen, D ;
Seborg, DE .
JOURNAL OF PROCESS CONTROL, 2003, 13 (01) :27-39
[7]  
Chen Q., 2013, IFAC P, V46, P643, DOI [10.3182/20131218-3-IN-2045.00030, DOI 10.3182/20131218-3-IN-2045.00030]
[8]  
Chidambaram M, 2013, J INDIAN I SCI, V85, P201
[9]   MULTIVARIABLE TUNING REGULATORS - FEEDFORWARD AND ROBUST CONTROL OF A GENERAL SERVOMECHANISM PROBLEM [J].
DAVISON, EJ .
IEEE TRANSACTIONS ON AUTOMATIC CONTROL, 1976, 21 (01) :35-47
[10]  
Desborough L., 2001, CHEM PROCESS CONTROL, V98