The Influence of Ball Burnishing on Friction in Lubricated Sliding

被引：14

作者：

Swirad, Slawomir ^{[1
]}

Pawlus, Pawel ^{[1
]}

机构：

[1] Rzeszow Univ Technol, Fac Mech Engn & Aeronaut, Powstancow Warszawy 8 St, PL-35959 Rzeszow, Poland

来源：

MATERIALS | 2020年 / 13卷 / 21期

关键词：

ball burnishing; coefficient of friction; surface topography; SURFACE-ROUGHNESS; WEAR-RESISTANCE; IMPROVEMENT; PARAMETERS; TOPOGRAPHY; HARDNESS; QUALITY; STATE;

D O I：

10.3390/ma13215027

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Ball burnishing treatment, using the Ecoroll system, of steel samples was conducted. In the experiment, the burnishing pressure was changed. After the treatments, measurements of the surface topographies of disc samples were conducted using a white light interferometer Talysurf CCI Lite. Tribological tests were carried out in a ball-on-disc configuration. After these tests, measurements of surface topographies of disc samples were repeated. Worn surfaces were also analyzed with a scanning electron microscope. It was found that as the result of burnishing, surface topography height of tested samples decreased. Ball burnishing led to a reduction in the frictional resistance. The highest friction reduction of more than 40% was achieved with a burnishing pressure of 20 MPa.

引用

页码：1 / 14

页数：14

共 36 条

[1] Ball-burnishing factors affecting residual stress of AISI 8620 steel [J].

Alshareef, Abdulaziz J. ;

Marinescu, Ioan D. ;

Basudan, Ibrahim M. ;

Alqahtani, Bader M. ;

Tharwan, Mohammed Y. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 107 (3-4) :1387-1397

[2] Study of Ball Burnishing Process on the Surface Roughness and Microhardness of AZ91D Alloy [J].

Buldum, B. B. ;

Cagan, S. C. .

EXPERIMENTAL TECHNIQUES, 2018, 42 (02) :233-241

[3] Effect of burnishing parameters on the surface quality and hardness [J].

Cobanoglu, Tamer ;

Ozturk, Sabri .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2015, 229 (02) :286-294

[4]

Dammak F, 2019, ADV MECH ENG MAT MEC, DOI [10.1007/978-3-030-52071-7_19, DOI 10.1007/978-3-030-52071-7_19]

[5] Quality improvement of ball-end milled sculptured surfaces by ball burnishing [J].

de Lacalle, LNL ;

Lamikiz, A ;

Muñoa, J ;

Sánchez, JA .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2005, 45 (15) :1659-1668

[6] The study of the tribological properties of one-process and two-process textures after vapour blasting and lapping using pin-on-disc tests [J].

Dzierwa, Andrzej ;

Pawlus, Pawel ;

Zelasko, Wieslaw ;

Reizer, Rafal .

ENGINEERING MATERIALS AND TRIBOLOGY, 2013, 527 :217-+

[7] Surface Texture Analysis of Hardened Shafts after Ceramic Ball Burnishing [J].

Dzionk, Stefan ;

Scibiorski, Bogdan ;

Przybylski, Wlodzimierz .

MATERIALS, 2019, 12 (02)

[8] State of the art in laser surface texturing [J].

Etsion, I .

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2005, 127 (01) :248-253

[9] Roughness parameters [J].

Gadelmawla, ES ;

Koura, MM ;

Maksoud, TMA ;

Elewa, IM ;

Soliman, HH .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 123 (01) :133-145

[10] Modification of surface finish produced by hard turning using superfinishing and burnishing operations [J].

Grzesik, Wit ;

Zak, Krzysztof .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2012, 212 (01) :315-322

← 1 2 3 4 →