Reduction of light induced degradation by P-type c-Si wafer quality control in industrial PERC production

被引:0
|
作者
Yoo, Chang Youn [1 ]
Lim, Jong Youb [1 ]
Kim, Jisun [1 ]
Hong, Keunkee [1 ]
Lee, Eunjoo [1 ]
Kim, Dong Seop [1 ]
机构
[1] Shinsung E&G Co Ltd, Tech Res Ctr, Seongnam Si 13543, Gyeonggi Do, South Korea
关键词
LID; Oxygen concentration; PERC; Quality control; Resistivity; ARGON GAS-FLOW; OXYGEN CONCENTRATION;
D O I
暂无
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
The impact of light induced degradation (LID) and wafer carrier lifetime have been measured on the basis of interstitial oxygen (Oi) concentration. The oxygen concentration in ingot is controlled by Argon flow rate, and the optimum carrier lifetime at low oxygen is investigated. These wafers are then processed in PERC mass production lines yielding average cell efficiency above 21.7%. The LID loss of 1% has been achieved after 40 hours with improved wafer quality having uniform base resistivity of 1 Omega.cm and oxygen concentration below 16ppma(new ASTM, F121-83). Monitoring oxygen contents after annealing process from ingot growing to cell fabrication is the key aspect of quality control.
引用
收藏
页码:0374 / 0376
页数:3
相关论文
共 50 条
  • [41] In-situ of the optoelectronic properties of very thin p-type μc-Si:H films and the potential profile at the p-(μc-Si:H)/i-(a-Si:H) interface
    Hamma, S
    Cabarrocas, PRI
    AMORPHOUS AND MICROCRYSTALLINE SILICON TECHNOLOGY-1998, 1998, 507 : 511 - 516
  • [42] Simulation of p-type c-Si solar cells with metal oxides as carrier-selective contacts
    Liu, Xiaoning
    Huang, Qian
    Yang, Xiufang
    Zhou, Jiakai
    Ren, Chengchao
    Su, Xianglin
    Xu, Zhiyuan
    Zhao, Ying
    Hou, Guofu
    SOLAR ENERGY, 2022, 240 : 84 - 89
  • [43] Emitter formation using laser doping technique on n- and p-type c-Si substrates
    Lopez, G.
    Ortega, P.
    Colina, M.
    Voz, C.
    Martin, I.
    Morales-Vilches, A.
    Orpella, A.
    Alcubilla, R.
    APPLIED SURFACE SCIENCE, 2015, 336 : 182 - 187
  • [44] On the application of hole-selective MoOx as full-area rear contact for industrial scale p-type c-Si solar cells
    Nasser, Hisham
    Es, Firat
    Zolfaghari Borra, Mona
    Semiz, Emel
    Kokbudak, Gamze
    Orhan, Efe
    Turan, Rasit
    PROGRESS IN PHOTOVOLTAICS, 2021, 29 (03): : 281 - 293
  • [45] On the application of hole-selective MoOx as full-area rear contact for industrial scale p-type c-Si solar cells
    Nasser, Hisham
    Es, Fırat
    Zolfaghari Borra, Mona
    Semiz, Emel
    Kökbudak, Gamze
    Orhan, Efe
    Turan, Raşit
    Progress in Photovoltaics: Research and Applications, 2021, 29 (03) : 281 - 293
  • [46] Effect of light irradiation during potential-induced degradation tests for p-type crystalline Si photovoltaic modules
    Masuda, Atsushi
    Hara, Yukiko
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2018, 57 (08)
  • [47] Quality control method based on photoluminescence imaging for the performance prediction of c-Si/a-Si:H heterojunction solar cells in industrial production lines
    Nos, O.
    Favre, W.
    Jay, F.
    Ozanne, F.
    Valla, A.
    Alvarez, J.
    Munoz, D.
    Ribeyron, P. J.
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2016, 144 : 210 - 220
  • [48] Electrical characterization of N-type nanocrystalline silicon on p-type crystalline silicon (nc-Si:H/c-Si) heterojunctions
    Xu, GY
    Wang, TM
    SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 2000, 15 (06) : 613 - 618
  • [49] Optimization of n-doping in n-type a-SI:H/p-type textured c-Si heterojunction for photovoltaic applications
    Tucci, M
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 1999, 57 (03) : 249 - 257
  • [50] Accelerated light-induced degradation for detecting copper contamination in p-type silicon
    Inglese, Alessandro
    Lindroos, Jeanette
    Savin, Hele
    APPLIED PHYSICS LETTERS, 2015, 107 (05)