Dependence of the SHS reaction behavior and product on B4C particle size in Al-Ti-B4C and Al-TiO2-B4C systems

被引：23

作者：

Zou, Binglin ^{[1
]}

Shen, Ping ^{[1
]}

Jiang, Qichuan ^{[1
]}

机构：

[1] Jilin Univ, Dept Mat Sci & Engn, Key Lab Automobile Mat, Changchun 130025, Peoples R China

来源：

MATERIALS RESEARCH BULLETIN | 2009年 / 44卷 / 03期

基金：

中国国家自然科学基金;

关键词：

Composites; Chemical synthesis; X-ray diffraction; Diffusion; HIGH-TEMPERATURE SYNTHESIS; MAGNESIUM MATRIX COMPOSITES; COMBUSTION SYNTHESIS; TIC-TIB2/AL COMPOSITES; FABRICATION; MECHANISM; TIB2; AL;

D O I：

10.1016/j.materresbull.2008.08.001

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Dependence of the combustion reaction behavior and product on the B4C particle size in the Al-Ti-B4C and Al-TiO2-B4C Systems Was investigated. The results show that in both systems, the SHS reaction kinetics is primarily controlled by diffusion. Increasing the B4C particle size not only makes the ignition and self-sustainment of the SHS reaction difficult but also decreases the wave velocity and the degree of conversion. In comparison, the dependence of the SHS reaction behavior and the resultant product on the B4C particle size is much more significant in the Al-Ti-B4C system than that in the Al-TiO2-B4C system. The reason for the different dependence behaviors was investigated based on the SHS reaction mechanisms. Crown Copyright (C) 2008 Published by Elsevier Ltd. All rights reserved.

引用

页码：499 / 504

页数：6

共 50 条

[21] Synthesis of Al8B4C7 ceramic powder from Al/B4C/C mixtures
Gao, Yuanfei
Huang, Zhaohui
Fang, Minghao
Liu, Yan-gai
Huang, Saifang
Ouyang, Xin
POWDER TECHNOLOGY, 2012, 226 : 269 - 273
[22] Examination of wear properties of Al/B4C composites reinforced with irregularly shaped B4C
Topcu, Ismail
JOURNAL OF CERAMIC PROCESSING RESEARCH, 2021, 22 (03): : 276 - 282
[23] Effect of distribution of B4C on the mechanical behaviour of Al-6061/B4C composite
Asghar, Z.
Latif, Muhammad Adnan
Rafi-ud-Din
Nazar, Zeeshan
Ali, Fahad
Basit, Abdul
Badshah, S.
Subhani, Tayyab
POWDER METALLURGY, 2018, 61 (04) : 293 - 300
[24] Effect of in situ synthesized TiB2 on the reaction between B4C and Al in a vacuum infiltrated B4C–TiB2–Al composite
P. Lü
X. Y. Yue
L. Yu
H. Q. Ru
Journal of Materials Science, 2009, 44 : 3483 - 3487
[25] Mechanical properties of Al-Cu/B4C and Al-Mg/B4C metal matrix composites
Ayvaz, Mehmet
Cetinel, Hakan
Materialpruefung/Materials Testing, 2021, 63 (04): : 350 - 355
[26] Mechanical properties of Al-Cu/B4C and Al-Mg/B4C metal matrix composites
Ayvaz, Mehmet
Cetinel, Hakan
MATERIALS TESTING, 2021, 63 (04) : 350 - 355
[27] Comparison of nanostructured Al/B4C composite produced by ARB and Al/B4C composite produced by RRB process
Alizadeh, Morteza
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 528 (02): : 578 - 582
[28] Reactions Between Ti2AlC, B4C, and Al and Phase Equilibria at 1000 A°C in the Al-Ti-B-C Quaternary System
Agne, Matthias T.
Anasori, Babak
Barsoum, Michel W.
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 2015, 36 (02) : 169 - 182
[29] Reactions Between Ti2AlC, B4C, and Al and Phase Equilibria at 1000 °C in the Al-Ti-B-C Quaternary System
Matthias T. Agne
Babak Anasori
Michel W. Barsoum
Journal of Phase Equilibria and Diffusion, 2015, 36 : 169 - 182
[30] Effect of particle size and ratio of B4C reinforcement on properties and morphology of nanocrystalline Al2024-B4C composite powders
Varol, Temel
Canakci, Aykut
POWDER TECHNOLOGY, 2013, 246 : 462 - 472

← 1 2 3 4 5 →