Tooth bending fatigue failures in gears

被引：82
|
作者：
Fernandes, PJL
机构：
[1] Metallurgical and Corrosion Services, MATTEK, CSIR, Auckland Park, 2006
来源：
ENGINEERING FAILURE ANALYSIS | 1996年 / 3卷 / 03期
关键词：
D O I：
10.1016/1350-6307(96)00008-8
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Tooth bending fatigue is one of the most common modes of fatigue failure in gears. It results in progressive damage to gear teeth and ultimately leads to complete failure of the gear. The characteristics of this failure mode are discussed in detail and a number of actual case studies are presented which show the occurrence of this failure mode in practice. Copyright (C) 1996 Elsevier Science Ltd.
引用
收藏
页码：219 / 225
页数：7
相关论文
共 50 条
  • [1] Tooth bending fatigue failures in gears
    Metallurgical and Corrosion Services, MATTEK, CSIR, Private Bag X28, Auckland Park 2006, South Africa
    Eng Failure Anal, 3 (219-225):
  • [2] Influence of shot peening on bending tooth fatigue limit of case hardened gears
    Benedetti, M
    Fontanari, V
    Höhn, BR
    Oster, P
    Tobie, T
    INTERNATIONAL JOURNAL OF FATIGUE, 2002, 24 (11) : 1127 - 1136
  • [3] Gear Root Bending Strength: A Comparison Between Single Tooth Bending Fatigue Tests and Meshing Gears
    Bonaiti, Luca
    Bayoumi, Ahmed Bayoumi Mahmoud
    Concli, Franco
    Rosa, Francesco
    Gorla, Carlo
    JOURNAL OF MECHANICAL DESIGN, 2021, 143 (10)
  • [4] TOOTH FLANK BREAKAGE - INFLUENCES ON SUBSURFACE INITIATED FATIGUE FAILURES OF CASE HARDENED GEARS
    Stahl, Karsten
    Hoehn, Bernd-Robert
    Tobie, Thomas
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2013, VOL 5, 2014,
  • [5] Effects of rolling on the tooth root bending fatigue strength of sintered ferrous alloy gears
    Miura, Hideshi
    Osada, Toshiko
    Suda, Naoki
    Komoto, Kosuke
    Hamamoto, Shota
    Unami, Shigeru
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2009, 56 (06): : 344 - 349
  • [6] A study into the impact of tooth root transition curve morphology on the bending fatigue life of gears
    Wang, Cheng
    INTERNATIONAL JOURNAL OF FATIGUE, 2025, 190
  • [7] Determination of Service Life of Sintered Powder Metallurgy Gears in Regard to Tooth Bending Fatigue
    Glodez, Srecko
    Sori, Marko
    Vuckovic, Kresimir
    Risovic, Stjepan
    CROATIAN JOURNAL OF FOREST ENGINEERING, 2018, 39 (01) : 129 - 138
  • [8] Surface contact fatigue failures in gears
    Fernandes, PJL
    McDuling, C
    ENGINEERING FAILURE ANALYSIS, 1997, 4 (02) : 99 - 107
  • [9] BENDING FATIGUE STRENGTH OF HARDENED GEARS
    LEVANOV, VL
    RUSSIAN ENGINEERING JOURNAL-USSR, 1968, 48 (03): : 3 - &
  • [10] BENDING FATIGUE AND CONTACT FATIGUE CHARACTERISTICS OF CARBURIZED GEARS
    CAVALLARO, GP
    WILKS, TP
    SUBRAMANIAN, C
    STRAFFORD, KN
    FRENCH, P
    ALLISON, JE
    SURFACE & COATINGS TECHNOLOGY, 1995, 71 (02): : 182 - 192
12345