The Effect of Sepiolite Loading on Curing and Tensile Properties of Sepiolite Filled Natural Rubber/Styrene-Butadiene Rubber (SMR L/SBR) Blends

被引：1
|
作者：
Nasution, Diana Adnanda [1 ]
Ismail, Hanafi [1 ]
Wirjosentono, Basuki [2 ]
Tamrin, Tamrin [2 ]
机构：
[1] Univ Sains Malaysia, Sch Mat & Mineral Resources Engn, Nibong Tebal 14300, Penang, Malaysia
[2] Univ Sumatera Utara, Dept Chem, Medan 20155, Indonesia
来源：
3RD INTERNATIONAL POSTGRADUATE CONFERENCE ON MATERIALS, MINERALS & POLYMER (MAMIP) 2019 | 2020年 / 2267卷
关键词：
sepiolite; SMR L/SBR blends; curing. and tensile properties; MORPHOLOGICAL PROPERTIES; MECHANICAL-PROPERTIES; THERMAL-DEGRADATION;
D O I：
10.1063/5.0015958
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
The effect of sepiolite loading on curing characteristics and tensile properties of sepiolite filled Natural Rubber/Styrene-Butadiene Rubber (SMR L/SBR) blends was studied. Scorch and cure times reduced with increasing sepiolite loading whereas minimum and maximum torques increased. The tensile strength and elongation at break exhibited maximum values at 3 phr of sepiolite loading but tensile modulus (M100 and M300) exhibited an increasing trend. Scanning electron microscopy (SEM) on tensile fractured surfaces of sepiolite filled SMR L/SBR blends also exhibited better-filled dispersion at 3 phr of sepiolite loading as compared with other filler loadings.
引用
收藏
页数：6
相关论文
共 50 条
  • [41] Curing characteristics, mechanical properties and oil resistance of styrene butadiene rubber/epoxidized natural rubber blends
    Ismail, H
    Suzaimah, S
    Hairunezam, HM
    JOURNAL OF ELASTOMERS AND PLASTICS, 2002, 34 (02): : 119 - 130
  • [42] Effect of a compatibilizer on curing characteristics, mechanical properties and oil resistance of styrene butadiene rubber/epoxidized natural rubber blends
    Ismail, Hanafi
    Hairunezam, H.M.
    1600, Elsevier Science Ltd, Exeter, United Kingdom (37):
  • [43] Effect of the filler characteristics on the miscibility of styrene-butadiene rubber and nitrile-butadiene rubber blends
    Perez, Leon D.
    Sierra, Ligia
    Lopez, Betty L.
    POLYMER ENGINEERING AND SCIENCE, 2008, 48 (10): : 1986 - 1993
  • [44] Influence of pyrolytic carbon black and pyrolytic oil made from used tires on the curing and (dynamic) mechanical properties of natural rubber (NR)/styrene-butadiene rubber (SBR) blends
    Karabork, F.
    Tipirdamaz, S. T.
    EXPRESS POLYMER LETTERS, 2016, 10 (01): : 72 - 82
  • [45] Temperature dependence on free volume in cured natural rubber and styrene-butadiene rubber blends
    Salgueiro, W.
    Somoza, A.
    Silva, L.
    Consolati, G.
    Quasso, F.
    Mansilla, M. A.
    Marzocca, A. J.
    PHYSICAL REVIEW E, 2011, 83 (05):
  • [46] Exploring nanocrystalline cellulose as a green alternative of carbon black in natural rubber/butadiene rubber/styrene-butadiene rubber blends
    Chen, W. J.
    Gu, J.
    Xu, S. H.
    EXPRESS POLYMER LETTERS, 2014, 8 (09): : 659 - 668
  • [47] The effects of plasticizer and filler on the curing characteristic and mechanical properties of (SBR) styrene butadiene rubber and (CR) chloroprene rubber blends
    Iqbal, Mahmood
    Akhter, Tehzeeb
    Farooqui, Zia-Ul-Haq
    Mahmood, Khalid
    JOURNAL OF THE CHEMICAL SOCIETY OF PAKISTAN, 2008, 30 (04): : 507 - 511
  • [48] Effect of organoclay reinforcement on the curing characteristics and technological properties of styrene-butadiene rubber
    Sadek, E. M.
    El-Nashar, D. E.
    Ahmed, S. M.
    POLYMER COMPOSITES, 2015, 36 (07) : 1293 - 1302
  • [49] Unsaturated polyester as compatibilizer for styrene-butadiene (SBR)/acrylonitrile-butadiene (NBR) rubber blends
    Mansour, SH
    Tawfik, SY
    Youssef, MH
    JOURNAL OF APPLIED POLYMER SCIENCE, 2002, 83 (11) : 2314 - 2321
  • [50] Thermal properties in cured natural rubber/styrene butadiene rubber blends
    Goyanes, S.
    Lopez, C. C.
    Rubiolo, G. H.
    Quasso, F.
    Marzocca, A. J.
    EUROPEAN POLYMER JOURNAL, 2008, 44 (05) : 1525 - 1534
12345