Experimental and Numerical Study of Heat Transfer and Flow Performance in 3D-Printing Microchannel with Staggered Pin-Fins Array

被引：0

作者：

Xu, Chong ^{[1
]}

Xu, Shanglong ^{[1
]}

Huang, Dagui ^{[1
]}

机构：

[1] Univ Elect Sci & Technol China, Dept Mechatron Engn, Chengdu, Peoples R China

来源：

PROCEEDINGS OF THE SEVENTH ASIA INTERNATIONAL SYMPOSIUM ON MECHATRONICS, VOL II | 2020年 / 589卷

关键词：

3D-printing; Staggered pin-fins; Heat transfer; SINKS;

D O I：

10.1007/978-981-32-9441-7_29

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

As hydraulic resistance of microchannel is concerned, the pin-fins can reduce up to half of the hydraulic resistance of conventional microchannel. The aluminum microchannel heat sink was fabricated by 3D printing technology. The flow and heat transfer characteristics in microchannel with two pin-fins (airfoil-profile and fish-shape) were studied by numerical simulation and experiments. The results indicated that the rough surface has negative effects on flow and heat transfer. The influence on pressure drop and heat transfer weaken when the Reynolds number (Re) exceed 1000. When the Re is greater than 700, the influence obviously weakens. The Re and the heat flux have a certain effect on the heat transfer performance when the Re is in the different ranges. Results from this study can help inform the design and rapid printing of compact cold plate antenna and LED.

引用

页码：286 / 299

页数：14

共 50 条

[31] Multi-objective optimization and performance assessment of microchannel heat sinks with micro pin-fins
Polat, Muhammed Emin
Ulger, Furkan
Cadirci, Sertac
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2022, 174
[32] Numerical investigation on the flow and heat transfer performances of a novel microchannel heat sink arranged with inclined pin fins
Yuan, Jin
Deng, Ningkang
Qu, Yongfeng
Du, Liang
Hu, Wenbo
Zhang, Zhaoyang
Wang, Hongxing
PHYSICA SCRIPTA, 2025, 100 (01)
[33] Numerical study on heat transfer characteristics of a pin-fin staggered manifold microchannel heat sink
Pan, Yu -Hui
Zhao, Rui
Nian, Yong -Le
Cheng, Wen -Long
APPLIED THERMAL ENGINEERING, 2023, 219
[34] A computational case study on the thermal performance of a rectangular microchannel having circular pin-fins
Malazi, Mahdi Tabatabaei
Kaya, Kenan
Dalkilic, Ahmet Selim
CASE STUDIES IN THERMAL ENGINEERING, 2023, 49
[35] Experimental and numerical analysis of heat sink using various patterns of cylindrical pin-fins
Ismail M.
International Journal of Thermofluids, 2024, 23
[36] Numerical Study of Fluid Flow and Heat Transfer in the Enhanced Microchannel With Oblique Fins
Lee, Y. J.
Lee, P. S.
Chou, S. K.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2013, 135 (04):
[37] EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER IN A ROTATING LATERAL OUTFLOW TRAPEZOIDAL CHANNEL WITH PIN-FINS
Zhang, Xuejiao
Li, Haiwang
You, Ruquan
Liu, Song
Tao, Zhi
PROCEEDINGS OF ASME TURBO EXPO 2022: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2022, VOL 6B, 2022,
[38] Experimental study on the influence of the Buoyancy number on heat transfer in a pin-fins channel under rotational conditions
Zhang, Xuejiao
You, Ruquan
Li, Haiwang
Pi, Changlin
Liu, Song
CASE STUDIES IN THERMAL ENGINEERING, 2024, 60
[39] Flow and heat transfer characteristics of micro pin-fins under jet impingement arrays
Lu, Xunfeng
Li, Weihong
Li, Xueying
Ren, Jing
Jiang, Hongde
Ligrani, Phil
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 143
[40] EFFECTS OF HIGH HEATING LOADS ON UNSTEADY FLOW AND HEAT TRANSFER IN A COOLING PASSAGE WITH A STAGGERED ARRAY OF PIN FINS
Lee, Chien-Shing
Shih, Tom I-P.
Bryden, Kenneth M.
Dennis, Richard A.
PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2019, VOL 5A, 2019,

← 1 2 3 4 5 →