What Determines the Drop Size in Sprays?

In many instances, sprays are formed from the breakup of liquid jets or sheets. We investigate the different parameters that determine the characteristic drop size in the breakup of sheets. We vary both the spraying parameters, such as the pressure and geometry of the nozzle, and the fluid parameters, such as viscosity and surface tension. The combined results show that the drop size is determined by a competition between fluid inertia and surface tension, which allows for the prediction of the drop size from the Weber number and geometry of the nozzle. Once rescaled with the average drop size, the size distribution is found to be described by a compound gamma distribution with two parameters, n and tn, with the former setting the ligament corrugation and the latter the width of the ligament size distribution. Fit values for m indicate that nozzles of a conical type produce ligaments of almost equal size, while the flat fan nozzles produce broader distributed ligament sizes. Values for n show that, for all nozzles, ligaments are very corrugated, which is not unexpected for such spray formation processes. By using high-speed photography of the sprays, the parameters m and n can be directly measured and, indeed, govern the drop-size distribution.