End milling finite element method for cutting force prediction and material removal analysis

被引：2

作者：

Suraidah, S. ^{[1
]}

Ridzuwan, Muhamad ^{[1
]}

Asmelash, Mebrahitom ^{[1
]}

Azhar, Azmir ^{[1
]}

Mulubrhan, Freselam ^{[2
]}

机构：

[1] Univ Malaysia Pahang, Fac Mech & Mfg Engn, Pekan, Pahang, Malaysia

[2] Univ Malaysia Pahang, Fac Ind Management, Pekan, Pahang, Malaysia

来源：

5TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH 2019 (ICMER 2019) | 2020年 / 788卷

关键词：

End milling; orthogonal cutting; finite element analysis; ALUMINUM PLATES; SIMULATION;

D O I：

10.1088/1757-899X/788/1/012020

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The paper presents an orthogonal cutting finite element model analysis on Aluminum 6061 in order to investigate the effect of different number of cutting tool flutes (two and four) on the von misses stress distribution and analysis of cutting forces in three force direction which are in F-x, F-y, F-z. The machining parameters used in the simulation and experiment was a depth of cut of 3 mm and 6 mm with a recommended machining parameter, a 2-flute and 4- flute end mill cutter used for each case. The results showed that the simulation and experiment indicated that the predicted and the measured cutting force of milling process are in a good agreement and the shape of the chip generated was similar.

引用

页数：8

共 16 条

[1] Identification of cutting force coefficients for the linear and nonlinear force models in end milling process using average forces and optimization technique methods [J].

Adem, Khaled A. M. ;

Fales, Roger ;

El-Gizawy, A. Sherif .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 79 (9-12) :1671-1687

[2]

Altintas Y, 2012, MANUFACTURING AUTOMATION: METAL CUTTING MECHANICS, MACHINE TOOL VIBRATIONS, AND CNC DESIGN, 2ND EDITION, P1

[3] Dry cutting study of an aluminium alloy (A2024-T351): a numerical and experimental approach [J].

Asad, M. ;

Girardin, F. ;

Mabrouki, T. ;

Rigal, J-F. .

INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) :499-502

[4] Finite Element Modeling of Three-Dimensional Milling Process of Ti-6Al-4V [J].

Bajpai, Vivek ;

Lee, Ineon ;

Park, Hyung Wook .

MATERIALS AND MANUFACTURING PROCESSES, 2014, 29 (05) :564-571

[5] Prediction of milling force coefficients from orthogonal cutting data [J].

Budak, E ;

Altintas, Y ;

Armarego, EJA .

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 1996, 118 (02) :216-224

[6]

Gebremariam M.A., 2017, REMAINING TOOL LIFE

[7] Experimental and numerical studies on the behavior of thin aluminum plates subjected to impact by blunt- and hemispherical-nosed projectiles [J].

Gupta, NK ;

Iqbal, MA ;

Sekhon, GS .

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2006, 32 (12) :1921-1944

[8] Numerical and experimental investigation of the shear angle in high-speed cutting of Al6061-T6 [J].

Hao, Mohan ;

Xu, Daochun ;

Feng, Pingfa .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 100 (9-12) :3037-3044

[9] Effect of Machining Feed on Surface Roughness in Cutting 6061 Aluminum [J].

Kuttolamadom, Mathew ;

Hamzehlouia, Sina ;

Mears, Laine .

SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2010, 3 (01) :108-119

[10]

Lesuer D.R., 1999, ENG RES DEV TECHNOLO

← 1 2 →