Non-monotonous dependence of surface roughness on factors influencing energy of adatoms during thin island film growth

Many experimental results show that surface roughness of thin films can increase, decrease, stay constant or pass through the minimum with the change in substrate temperature, energy of arriving atoms or assisted beam (electrons, photons, ions), depending on material and interval of variation of those parameters. The aim of this paper is to explain and analyze this non-monotonous behavior of surface roughness by proposed kinetic model. The model is based on rate equations and includes processes of surface diffusion of adatoms, nucleation, growth and coalescence of islands in the case of thin films growth in Volmer-Weber mode. It is shown by modeling that non-monotonous dependence of surface roughness on the factors influencing energy of adatoms (e.g. temperature, assisted beam irradiation, accelerating voltage) occurs as a result of interplay between diffusion length of adatoms and size of islands, because both parameters depend on energy of adatoms. Variation of island size and diffusion length results in atomic jumps from islands forming rougher or smoother surface. The functions of surface roughness, island size, island density on diffusion length of adatoms and on other parameters are calculated and analyzed in this work. (c) 2006 Elsevier B.V. All rights reserved.