Mesoscale Characterization of Fracture Properties of Steel Fiber-Reinforced Concrete Using a Lattice-Particle Model

被引：29

作者：

Montero-Chacon, Francisco ^{[1
]}

Cifuentes, Hector ^{[2
]}

Medina, Fernando ^{[2
]}

机构：

[1] Univ Loyola Andalucia, Dept Engn, Calle Energia Solar 1, Seville 41014, Spain

[2] Univ Seville, ETS Ingn, Camino Descubrimientos S-N, Seville 41092, Spain

来源：

MATERIALS | 2017年 / 10卷 / 02期

关键词：

lattice-particle model; fiber-reinforced concrete; fracture; FAILURE; DAMAGE; SIMULATIONS; COMPOSITES; EXISTENCE; BEHAVIOR; DESIGN; SIZE;

D O I：

10.3390/ma10020207

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

This work presents a lattice-particle model for the analysis of steel fiber-reinforced concrete (SFRC). In this approach, fibers are explicitly modeled and connected to the concrete matrix lattice via interface elements. The interface behavior was calibrated by means of pullout tests and a range for the bond properties is proposed. The model was validated with analytical and experimental results under uniaxial tension and compression, demonstrating the ability of the model to correctly describe the effect of fiber volume fraction and distribution on fracture properties of SFRC. The lattice-particle model was integrated into a hierarchical homogenization-based scheme in which macroscopic material parameters are obtained from mesoscale simulations. Moreover, a representative volume element (RVE) analysis was carried out and the results shows that such an RVE does exist in the post-peak regime and until localization takes place. Finally, the multiscale upscaling strategy was successfully validated with three-point bending tests.

引用

页数：19

共 48 条

[1]

[Anonymous], 1971, P S INT SOC ROCK MEC

[2]

[Anonymous], 2012, Integrated Computational Materials Engineering (ICME) for Metals: Using Multiscale Modeling to Invigorate Engineering Design with Science

[3] Model for the analysis of steel fibre reinforced concrete slabs on grade [J].

Barros, JAO ;

Figueiras, JA .

COMPUTERS & STRUCTURES, 2001, 79 (01) :97-106

[4]

BAZANT ZP, 1990, J ENG MECH-ASCE, V116, P1686

[5]

Bentur A., 2007, Fibre reinforced cementitious composites, V2nd ed., DOI DOI 10.1016/0010-4361(79)90446-4

[6]

Bolander J. E., 1998, ENG FRACT MECH, V113, P1619

[7] Discrete modeling of short-fiber reinforcement in cementitious composites [J].

Bolander, JE ;

Saito, S .

ADVANCED CEMENT BASED MATERIALS, 1997, 6 (3-4) :76-86

[8]

Comite Euro-International du Beton CEB-FIP Model Code, 1990, B INFORM, V213/214

[9] Pullout Behavior of Steel Fibers in Self-Compacting Concrete [J].

Cunha, Victor M. C. F. ;

Barros, Joaquim A. O. ;

Sena-Cruz, Jose M. .

JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2010, 22 (01) :1-9

[10] A finite element model with discrete embedded elements for fibre reinforced composites [J].

Cunha, Vitor M. C. F. ;

Barros, Joaquim A. O. ;

Sena-Cruz, Jose M. .

COMPUTERS & STRUCTURES, 2012, 94-95 :22-33

← 1 2 3 4 5 →