Application of X-ray microtomography to study the influence of the casting microstructure upon the tensile behaviour of an Al-Si alloy

被引：32

作者：

Limodin, Nathalie ^{[1
]}

El Bartali, Ahmed ^{[1
,2
]}

Wang, Long ^{[1
,2
]}

Lachambre, Joel ^{[3
]}

Buffiere, Jean-Yves ^{[3
]}

Charkaluk, Eric ^{[1
]}

机构：

[1] CNRS, UMR 8107, LML, F-59650 Villeneuve Dascq, France

[2] Ecole Cent Lille, F-59650 Villeneuve Dascq, France

[3] CNRS, Lab Mat Ingn & Sci MATEIS, INSA Lyon, UMR 5510, F-69621 Villeurbanne, France

来源：

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS | 2014年 / 324卷

关键词：

Cast aluminium silicon alloys; Digital Image Correlation; Laboratory X-ray CT; SYNCHROTRON TOMOGRAPHY; ALUMINUM-ALLOYS; FATIGUE; POROSITY; FOAM;

D O I：

10.1016/j.nimb.2013.07.034

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

In cast aluminium alloys used in the automotive industry the microstructure inherited from the foundry process has a strong influence on the mechanical properties. In the cylinder heads produced by the Lost Foam Casting process, the microstructure consists of hard intermetallic phases and large gas and microshrinkage pores. To study its influence, full field measurements at the microstructure scale were performed during a tensile test performed in situ under X-ray microtomography. Intermetallics were used as a natural speckle pattern. Feasibility of Digital Volume Correlation on this alloy was proved and the accuracy of the measurement was assessed and discussed in light of the small volume fraction of intermetallics and in comparison with the accuracy of Digital Image Correlation performed on optical images at a finer spatial resolution. (C) 2013 Elsevier B.V. All rights reserved.

引用

页码：57 / 62

页数：6

共 18 条

[1]

Boulos V., 2012, 2012 C DES ARCH SIGN, P1

[2] In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics [J].

Buffiere, J. -Y. ;

Maire, E. ;

Adrien, J. ;

Masse, J. -P. ;

Boller, E. .

EXPERIMENTAL MECHANICS, 2010, 50 (03) :289-305

[3] Experimental study of porosity and its relation to fatigue mechanisms of model Al-Si7-Mg0.3 cast Al alloys [J].

Buffière, JY ;

Savelli, S ;

Jouneau, PH ;

Maire, E ;

Fougères, R .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 316 (1-2) :115-126

[4] 3D Characterization of the Influence of Porosity on Fatigue Properties of a Cast Al Alloy [J].

Caty, Olivier ;

Buffiere, Jean-Yves ;

Maire, Eric ;

Adrien, Jerome .

ADVANCED ENGINEERING MATERIALS, 2011, 13 (03) :194-198

[5]

El Bartali A, 2013, 7 INT C LOW CYCL FAT, V9-11, P34

[6] Surface observation and measurement techniques to study the fatigue damage micromechanisms in a duplex stainless steel [J].

El Bartali, Ahmed ;

Aubin, Veronique ;

Degallaix, Suzanne .

INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (11-12) :2049-2055

[7]

Firsching M., 2010, 10 EUR C NOND TEST E, p[10, 4]

[8] A comparative study of high resolution cone beam X-ray tomography and synchrotron tomography applied to Fe- and Al-alloys [J].

Kastner, Johann ;

Harrer, Bernhard ;

Requena, Guillermo ;

Brunke, Oliver .

NDT & E INTERNATIONAL, 2010, 43 (07) :599-605

[9] Analysis and Artifact Correction for Volume Correlation Measurements Using Tomographic Images from a Laboratory X-ray Source [J].

Limodin, N. ;

Rethore, J. ;

Adrien, J. ;

Buffiere, J. -Y. ;

Hild, F. ;

Roux, S. .

EXPERIMENTAL MECHANICS, 2011, 51 (06) :959-970

[10] Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation [J].

Limodin, Nathalie ;

Rethore, Julien ;

Buffiere, Jean-Yves ;

Hild, Francois ;

Roux, Stephane ;

Ludwig, Wolfgang ;

Rannou, Johann ;

Gravouil, Anthony .

ACTA MATERIALIA, 2010, 58 (08) :2957-2967

← 1 2 →