Substitution potentials of recycled HDPE and wood particles from post-consumer packaging waste in Wood-Plastic Composites

被引:111
作者
Sommerhuber, Philipp F. [1 ]
Welling, Johannes [1 ]
Krause, Andreas [2 ]
机构
[1] Thunen Inst Wood Res, D-21031 Hamburg, Germany
[2] Univ Hamburg, Dept Wood Sci, Inst Mech Wood Technol, D-21031 Hamburg, Germany
关键词
Wood-Plastic-Composites; Cascade use; Waste valorisation; Mechanical properties; Substitution; Recycled resources; MECHANICAL-PROPERTIES; DIMENSIONAL STABILITY; RECOVERED WOOD;
D O I
10.1016/j.wasman.2015.09.011
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
The market share of Wood Plastic Composites (WPC) is small but expected to grow sharply in Europe. This raises some concerns about suitable wood particles needed in the wood-based panels industry in Europe. Concerns are stimulated by the competition between the promotion of wooden products through the European Bioeconomy Strategy and wood as an energy carrier through the Renewable Energy Directive. Cascade use of resources and valorisation of waste are potential strategies to overcome resource scarcity. Under experimental design conditions, WPC made from post-consumer recycled wood and plastic (HDPE) were compared to WPC made from virgin resources. Wood content in the polymer matrix was raised in two steps from 0% to 30% and 60%. Mechanical and physical properties and colour differences were characterized. The feasibility of using cascaded resources for WPC is discussed. Results indicate the technical and economic feasibility of using recycled HDPE from packaging waste for WPC. Based on technical properties, 30% recycled wood content for WPC is feasible, but economic and political barriers of efficient cascading of biomass need to be overcome. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:76 / 85
页数:10
相关论文
共 46 条
  • [1] Dimensional stability and mechanical behaviour of wood-plastic composites based on recycled and virgin high-density polyethylene (HDPE)
    Adhikary, Kamal B.
    Pang, Shusheng
    Staiger, Mark P.
    [J]. COMPOSITES PART B-ENGINEERING, 2008, 39 (05) : 807 - 815
  • [2] [Anonymous], J IND ECOL
  • [3] [Anonymous], 2012, STANDORTE HOLZWIRTSC, P65
  • [4] [Anonymous], 2013, RECYCLING ROHSTOFFE
  • [5] Morphology and mechanical properties of reconstituted wood board waste-polyethylene composites
    Balasuriya, PW
    Ye, L
    Mai, YW
    [J]. COMPOSITE INTERFACES, 2003, 10 (2-3) : 319 - 341
  • [6] Boeglin N, 1997, HOLZ ROH WERKST, V55, P13, DOI 10.1007/s001070050217
  • [7] Properties of Wood Fibre-Polypropylene Composites: Effect of Wood Fibre Source
    Butylina, Svetlana
    Martikka, Ossi
    Karki, Timo
    [J]. APPLIED COMPOSITE MATERIALS, 2011, 18 (02) : 101 - 111
  • [8] Mechanical properties of wood plastic composite panels made from waste fiberboard and particleboard
    Chaharmahali, Majid
    Tajvidi, Mehdi
    Najafi, Saeed Kazemi
    [J]. POLYMER COMPOSITES, 2008, 29 (06) : 606 - 610
  • [9] Chen HC, 2006, HOLZ ROH WERKST, V64, P172, DOI 10.1007/s00107-005-0072-x
  • [10] DSC Analysis and Mechanical Properties of Wood-Plastic Composites
    Cui, Y. H.
    Tao, J.
    Noruziaan, B.
    Cheung, M.
    Lee, S.
    [J]. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2010, 29 (02) : 278 - 289