Effect of Ni and Cr Addition on Transformation and Properties of Low-Carbon Bainitic Steels

被引：9
作者：
Yao, Zishan [1 ]
Xu, Guang [1 ]
Hu, Haijiang [1 ]
Yuan, Qing [1 ]
Tian, Junyu [1 ]
Zhou, Mingxing [1 ]
机构：
[1] Wuhan Univ Sci & Technol, Hubei Collaborat Innovat Ctr Adv Steels, State Key Lab Refractories & Met, 947 Heping Ave, Wuhan 430081, Hubei, Peoples R China
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2019年 / 72卷 / 05期
基金：
中国国家自然科学基金;
关键词：
Bainitic transformation; Microstructure; Properties; Ni; Cr; MECHANICAL-PROPERTIES; AUSTENITE STABILITY; MICROSTRUCTURE; TEMPERATURE; NB; BORON;
D O I：
10.1007/s12666-019-01590-7
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Four low-carbon bainitic steels with different nickel (Ni) and chromium (Cr) contents were designed to analyze the influences of Ni and Cr on bainitic transformation, microstructure and properties by metallographic method and dilatometry. The results showed that compared to the base steel, the kinetics of bainitic transformation in Ni or Cr addition steels was retarded. In addition, single Cr addition increased the amount of bainitic transformation in spite of the retarded transformation kinetics, while single Ni addition decreased the amount of bainitic transformation. Combined addition of Ni and Cr further reduced the kinetics of bainitic transformation. Moreover, individual Ni and Cr addition or composite addition of Ni and Cr improved the strength by refining bainite microstructure, carbide precipitation and martensite, but the total elongation decreased at the same time. Steel with composite addition of Ni and Cr presented the best product of strength and elongation. The work provided reference for the composition design of low-carbon bainitic steels.
引用
收藏
页码：1167 / 1174
页数：8
相关论文
共 50 条
  • [31] Effect of austenite deformation and chemical composition on the microstructure and hardness of low-carbon and ultralow-carbon bainitic steels
    Suikkanen, P. P.
    Komi, J. I.
    Karjalainen, L. P.
    [J]. METAL SCIENCE AND HEAT TREATMENT, 2005, 47 (11-12) : 507 - 511
  • [32] Strain Rate-Dependent Tensile and Fracture Properties of Low-Carbon Ferritic Low-Density Steels
    Singh, Vinit Kumar
    Rana, Radhakanta
    Singh, Shiv Brat
    Kundu, Amrita
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2024, 55 (08): : 2990 - 3010
  • [33] Effects of B and Cu Addition and Cooling Rate on Microstructure and Mechanical Properties in Low-Carbon, High-Strength Bainitic Steels
    Sung, Hyo Kyung
    Shin, Sang Yong
    Hwang, Byoungchul
    Lee, Chang Gil
    Lee, Sunghak
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (10): : 3703 - 3714
  • [34] Effect of Nickel Contents on the Microstructure and Mechanical Properties for Low-Carbon Bainitic Weld Metals
    Mao, Gaojun
    Cao, Rui
    Yang, Jun
    Jiang, Yong
    Wang, Shuai
    Guo, Xili
    Yuan, Junjun
    Zhang, Xiaobo
    Chen, Jianhong
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (05) : 2057 - 2071
  • [35] Effect of 0.06%Nb on the microstructure and mechanical properties of Mn-series low carbon air-cooling bainitic steels
    Feng Chun
    Bai Bing Zhe
    Zheng Yan Kang
    [J]. MATERIALS AND DESIGN, PTS 1-3, 2011, 284-286 : 1191 - +
  • [36] Effect of Nickel Contents on the Microstructure and Mechanical Properties for Low-Carbon Bainitic Weld Metals
    Gaojun Mao
    Rui Cao
    Jun Yang
    Yong Jiang
    Shuai Wang
    Xili Guo
    Junjun Yuan
    Xiaobo Zhang
    Jianhong Chen
    [J]. Journal of Materials Engineering and Performance, 2017, 26 : 2057 - 2071
  • [37] Effect of Strain Aging on the Rate Dependence of the Strain Resistance and the Cold Resistance of Low-Carbon Steels with Ferritic–Pearlitic and Bainitic Structures
    A. R. Mishet’yan
    G. A. Fillipov
    O. N. Chevskaya
    [J]. Russian Metallurgy (Metally), 2021, 2021 : 1284 - 1288
  • [38] Effect of Strain Rate on the Bainitic Transformation in Fe-C-Mn-Si Medium-Carbon Bainitic Steels
    Chen, Guanghui
    Xu, Guang
    Zurob, Hatem S.
    Hu, Haijiang
    Wan, Xiangliang
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (02): : 573 - 580
  • [39] Application of Artificial Neural Network to the Prediction of Tensile Properties in High-Strength Low-Carbon Bainitic Steels
    Lee, Sang-In
    Shin, Seung-Hyeok
    Hwang, Byoungchul
    [J]. METALS, 2021, 11 (08)
  • [40] Acceleration of bainitic transformation in nanostructured, low temperature bainitic steels by using of thermodynamic model
    Yoozbashi, Mir Nariman
    Yazdani, Sasan
    [J]. SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIALS, PTS 1-2, 2011, 172-174 : 214 - 220
12345