Modeling of delamination using a discretized cohesive zone and damage formulation

被引：73
|
作者：
Borg, R [1 ]
Nilsson, L [1 ]
Simonsson, K [1 ]
机构：
[1] Linkoping Inst Technol, Div Solid Mech, Dept Mech Engn, SE-58183 Linkoping, Sweden
来源：
COMPOSITES SCIENCE AND TECHNOLOGY | 2002年 / 62卷 / 10-11期
关键词：
carbon fibers; laminates; delamination; crack;
D O I：
10.1016/S0266-3538(02)00070-2
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
Delamination initiation and growth are analyzed by using a discrete cohesive crack model. The delamination is constrained to grow along a tied interface. The model is derived by postulating the existence of a maximum load surface which limits the adhesive forces in the process zone of the crack. The size of this maximum load surface is made dependent on the amount of dissipated crack opening work, such that the maximum load surface shrinks to zero as a predefined amount of work is consumed. A damage formulation is used to reduce the adhesive forces. Mode I, II and III loading or any combined loading is possible. An analytical solution is obtained for a single mode opening and the implications of this result on the governing equations is discussed. The delamination model is implemented in the finite element code LS-DYNA and simulation results are shown to be in agreement with experimental results. (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：1299 / 1314
页数：16
相关论文
共 50 条
  • [1] Simulation of low velocity impact on fiber laminates using a cohesive zone based delamination model
    Borg, R
    Nilsson, L
    Simonsson, K
    COMPOSITES SCIENCE AND TECHNOLOGY, 2004, 64 (02) : 279 - 288
  • [2] Delamination Modeling in LED Package by Cohesive Zone Method
    Zhang, Bingbing
    Yang, Daoguo
    2013 14TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2013, : 1217 - 1221
  • [3] Delamination Modeling for Power Packages by the Cohesive Zone Approach
    Dudek, R.
    Doering, R.
    Pufall, R.
    Kanert, W.
    Seiler, B.
    Rzepka, S.
    Michel, B.
    2012 13TH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS (ITHERM), 2012, : 187 - 193
  • [4] Cohesive Zone Modeling of Mixed-Mode Delamination Testa
    Zhang, Bingbing
    Yang, Daoguo
    Ernst, Leo
    2013 14TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2013, : 559 - +
  • [5] Cohesive zone modeling of interfacial delamination in PZT thin films
    Yan, Yabin
    Shang, Fulin
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2009, 46 (13) : 2739 - 2749
  • [6] Modeling of composite fracture using cohesive zone and bridging models
    Sun, CT
    Jin, ZH
    COMPOSITES SCIENCE AND TECHNOLOGY, 2006, 66 (10) : 1297 - 1302
  • [7] Prediction of delamination growth in laminated composites using acoustic emission and Cohesive Zone Modeling techniques
    Saeedifar, Milad
    Fotouhi, Mohamad
    Najafabadi, Mehdi Ahmadi
    Toudeshky, Hossein Hosseini
    COMPOSITE STRUCTURES, 2015, 124 : 120 - 127
  • [8] Closed-form solutions for cohesive zone modeling of delamination toughness tests
    Xie, Jiawen
    Waas, Anthony M.
    Rassaian, Mostafa
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2016, 88-89 : 379 - 400
  • [9] Cohesive zone modeling of the autoclave pressure effect on the delamination behavior of composite laminates
    Chang, Tengfei
    Zhan, Lihua
    Tan, Wei
    Wu, Xintong
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2018, 37 (24) : 1468 - 1480
  • [10] Irreversible mixed mode interface delamination using a combined damage-plasticity cohesive zone enabling unloading
    Kolluri, M.
    Hoefnagels, J. P. M.
    van Dommelen, J. A. W.
    Geers, M. G. D.
    INTERNATIONAL JOURNAL OF FRACTURE, 2014, 185 (1-2) : 77 - 95
12345